This genuine bump head knob assembly, sometimes known simply as the bump head, is black and approximately 2 inches long. Sold individually, this plastic part releases the cutting line. Over time, this part may break due to wear, and you will know it is broken because it will completely stop functioning.
A troubleshooting tip is to tap t...Read morehe part on theg round to see if the cutting line advances. This is an easy repair to make, and does not require any tools. You will need to look for the bump head attachment point on the bottom of the cutting head assembly.
The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor.
This part is sold individually, and you wil...Read morel know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks.
Most customers rated this repair as easy.
This spool is for line trimmers.
Spool houses the cutting line and fits inside the cutting head to cut grass and weeds.
Wear work gloves to protect your hands when installing this part.
The manufacturer-certified Air Cleaner Filter is a grey foam filter used to prevent debris and dirt from entering the carburetor and engine, causing damage. Installation is rated as "Easy". This filter may become clogged and cause the engine to run rough due the restricted air flow, at which time the filter should be replaced. This filter is placed inside the air cleaner housing.
Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose is to keep pressure on the Bump Head Knob Assembly.
This retainer clip is a metal piece used to secure components and provide stability inside trimmers. It is an authentic manufacturer replacement clip which is positioned on the trimmer hub and designed to hold the spool in position during use. If the retaining clip is worn down or broken, the trimmer head and outer spool will come loose a...Read morend may slip off the shaft, the trimmer line will tangle and jam, and the trimmer may experience reduced power. You will need a small screwdriver and set of pliers to remove the faulty clip, and a retainer ring tool to lock the new one in position. This part is sold individually.
This genuine OEM sourced item is specially designed for use with gas powered lawn and garden equipment. This rope is part of the recoil starter mechanism which allows user to pull-start the engine. One durable nylon rope is included per order, please note the plastic grip handle is sold separately.
The anti-rotation screw attaches to the lower handle clamp. This item is priced individually and is made out of metal. It is a genuine replacement part used in compatible tillers, trimmers, and blowers made by Ryobi, Troy-Bilt, MTD, Bolens, Yard Man, Yard Machines, and Cub Cadet. A torx screwdriver will be needed during the installation process. It will need to be replaced if it becomes stripped or broken.
This is an authentic OEM MTD, Ryobi, Troy-Bilt, Yard-Man, Bolens, Yard Machines part for use with line trimmers. The engine flywheel attaches to the crankshaft behind the recoil starter assembly. The recoil starter engages the flywheel to spin and start the engine. The most common use for replacing the flywheel assembly is if the engine ...Read moreis misfiring, missing, stuttering not starting or overheating. This part is sold individually. Here is a list of tools that are needed to replace the engine flywheel a receptacle for draining fuel, Phillip's screwdriver, Torx wrenches, starter rope (or similar object) for binding the engine, spark plug wrench or socket, adjustable wrench, long-nosed pliers and a rubber mallet. Let the engine cool and disconnect the spark plug wire before installing this part.
This durable plastic pull handle is a genuine part sourced directly from the manufacturer for use with the Ryobi equipment listed below. The handle connects to the rope of the starter housing assembly and is used to start the machine. This item is sold individually.
This replacement fuel line assembly includes the in-tank fuel filter that is specially manufactured for use with Ryobi string trimmers. It is purpose is to ensure the fuel that is supplied into the carburetor is free of any dirt and other debris that may be in the tank. Over time it may get clogged restricting the fuel flow and eventually...Read more requiring a replacement. It is made from durable plastic material and it is sold individually.
It is a genuine replacement part which is supplied directly from the original equipment manufacturer for use with handheld lawn and garden equipment. The purpose of this special cap is to keep the fuel in the tank, this part provides an identical replacement for a missing or damaged component which came with the new unit. It is a high-quality part which is made of durable plastic material and is sold individually.