This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this hig...Read moreh-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.
The Nut-Flange, Ni, simply known as a Flange Nut, is a silver metal individually sold part which can be applied with a wrench or socket and torque wrench. Simply torque the part to the manufacturer specifications. It is used to secure the idler arm assembly to the frame, and will need to be replaced if damaged. You can tell if it is brok...Read moreen if there are signs of visible damage, or the part won't tighten all the way due to damaged threads.
Customers rated this repair as easy.
This is a genuine Toro replacement part. The clip is commonly found in snowthrowers and lawn tractors. This part is made of metal, and is generally used to secure plate-like components in place. It may be used in various locations in the machine, depending on model. Please refer to the parts diagram to be sure of ordering the correct ...Read morepart. You may require a wrench or screwdriver when replacing this part. This item is sold individually.
This OEM lock nut is used in your lawn equipment to keep its parts securely fastened and prevent them from coming loose. It is often found at the end of a threaded bolt. This lock nut has a nylon insert inside and a diameter of 3/4 inches. Over time, the lock nut can wear out due to regular use. When this happens, you may hear strange kno...Read morecking or rattling noises coming from your machine. You may also feel more vibrations from it than usual. If you take a close look at the nut, it might appear bent or deformed. If you do not replace a worn-out lock nut, the parts of your machine can fall off. To replace a lock nut, you need a socket wrench to loosen it from your machine. Since this lock nut is sold individually, consult your instruction manual to determine how many your machine needs. If you are replacing one lock nut, it is recommended that you replace all of them as they tend to wear out at the same time.
It is a genuine replacement part that is supplied by the original manufacturer for use with Toro snowthrowers. This is a special hardware which helps to secure the scraper blade assembly, please make sure to check appropriate diagrams of your model for the correct application of this screw. It is a high-quality component which is made of durable metal and is sold individually.