Models > 3121WTA

3121WTA Magic Chef Range - Overview

Sections of the 3121WTA

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W – Part Number: 8009
Light Bulb - 40W
★★★★★
★★★★★
(63)
PartSelect #: PS884734
Manufacturer #: 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$7.32
  In Stock
Order within the next 1 hr and 42 mins and your part ships today!
Flat Style Oven Igniter Kit – Part Number: 12400035
Flat Style Oven Igniter Kit
★★★★★
★★★★★
(49)
PartSelect #: PS1573892
Manufacturer #: 12400035
The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part can be used for both ...
$52.15
  In Stock
Order within the next 1 hr and 42 mins and your part ships today!
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(6)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$19.99
  In Stock
Order within the next 1 hr and 42 mins and your part ships today!
Oven Rack – Part Number: WP7801P173-60
Oven Rack
★★★★★
★★★★★
(20)
PartSelect #: PS11744745
Manufacturer #: WP7801P173-60
This is a replacement oven rack and it is designed for use with ranges and ovens. This is a genuine OEM replacement part. The rack provides a level and stable surface for cookware inside of your appli...
$76.85
  In Stock
Order within the next 1 hr and 42 mins and your part ships today!
Screw - 10-16 x 1 – Part Number: WP3387230
Screw - 10-16 x 1
★★★★★
★★★★★
(2)
PartSelect #: PS11741409
Manufacturer #: WP3387230
This screw is sold individually.
$7.76
  In Stock
Order within the next 1 hr and 42 mins and your part ships today!
Door Seal – Part Number: WP7212P043-60
Door Seal
★★★★★
★★★★★
(5)
PartSelect #: PS11743947
Manufacturer #: WP7212P043-60
This door seal is used for ranges and ovens. The seal prevents hot air escaping from the oven to maintain a certain temperature when baking. The clips sticking out of the seal help secure it to the ra...
$56.86
  In Stock
Order within the next 1 hr and 42 mins and your part ships today!
Anti-Tip Bracket – Part Number: WP3801F656-51
Anti-Tip Bracket
★★★★★
★★★★★
(1)
PartSelect #: PS11741944
Manufacturer #: WP3801F656-51
Sold individually.
$9.44
  In Stock
Order within the next 1 hr and 42 mins and your part ships today!
Stand Mixer Screw – Part Number: WP4159193
Stand Mixer Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742292
Manufacturer #: WP4159193
This screw is sold individually.
$8.72
  In Stock
Order within the next 1 hr and 42 mins and your part ships today!
Double Burner Assembly – Part Number: 3412A004-19
Double Burner Assembly
PartSelect #: PS2037555
Manufacturer #: 3412A004-19
This double burner design is not to be used with sealed burner style models.   No Longer Available
Light Assembly – Part Number: WP7407P182-60
Light Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS11744525
Manufacturer #: WP7407P182-60
$49.27
  In Stock
Order within the next 1 hr and 42 mins and your part ships today!
Screw - 6-32 x 5/16 – Part Number: WP74004005
Screw - 6-32 x 5/16
PartSelect #: PS11744050
Manufacturer #: WP74004005
This screw is well under an inch long, and is made of metal.
$4.12
  In Stock
Order within the next 1 hr and 42 mins and your part ships today!
Door Hinge Kit – Part Number: 12400043
Door Hinge Kit
★★★★★
★★★★★
(1)
PartSelect #: PS2006885
Manufacturer #: 12400043
This oven door hinge assembly comes with two screws and is intended for use with many ovens. It can be used on either the left or right hand side.   No Longer Available

Questions And Answers for 3121WTA

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 3121WTA

[Viewing 9 of 9]
Gas igniter glows, but will not light
Fixed by
these parts
Show All
Little to no heat when baking
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Oven not heating evenly
Fixed by
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
Show All
Gas smell
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
Oven is too hot
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven would not work but the Broiler did
The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and found this site that explained it was possible for the igniter to glow but if it was not drawing the correct amperage (because its resistance was too high) then the main brain would not allow the gas valve to open. So I took a look at the broiler and it had the same igniter. I measure the resistance of both of them and the oven igniters resistance was higher (don't rememeber the reading) then I moved the Igniter from the broiler to the oven and the oven worked from there it was just a matter of ordering the part. End of story except for I am still doing all the cooking on the barbecue outside.
Parts Used:
Flat Style Oven Igniter Kit
  • James from Ferndale, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
332 of 362 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would'nt light
In most cases if your oven won't light or takes a long time to light you may have a bad igniter even if it glows. To check the igniter use a voltmeter to check for 120 A/C volts going to the igniter and3.5 A/C volts going between the ingniter and the gas valve. My bad ingniter glowed but had only only 3.0 A/C volts going to the gas valve for the oven. The new igniter took only 45 minutes to install and supply's 3.6 A/C volts to the gas valve and the oven works fine.
Parts Used:
Flat Style Oven Igniter Kit
  • Charles from Charlestown, RI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
128 of 139 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven failed to light
My son replaced the broiler igniter this spring, so I had a clue as to what was required. This was even easier and since I had back surgery recently & my husband was out of town that was a giant plus!

I unplugged the oven, removed the oven door, found the release latch and removed the oven floor. I then removed the 2 screws that held the igniter in place (I received this stove used and the igniter had evidently been replaced before as it was the same shorter version included in the kit). I pulled the igniter out then removed some insulation and tugged the connector out of the oven floor. I disconnected the igniter and plugged the new one in. I then replaced the connector in the floor, attached the igniter with the screws, replaced the insulation and did a test run (plugged in the oven & turned it on). That was successful so I put the floor back in and put the door back on.
Ta-Dah!
Parts Used:
Flat Style Oven Igniter Kit
  • Beryl from Dawsonville, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
68 of 71 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!