This authentic replacement rocker switch is supplied directly from original manufacturer. It is specially made for use with DeLonghi heaters. It controls the on/off functions of a unit. Switches are commonly replaced parts, over time, mechanical internals will wear out requiring replacement. This plastic switch is sold individually. To c...Read moreomplete this repair you will need a screwdriver. • First make sure the tools is not plugged in • Then you want to remove the cover screws • Remove the old switch • Secure the new switch in place • Reassemble and test the unit
This part comes directly from the manufacturer. This Castor is used on multiple models of Delonghi heaters. The Castor is made of a hard dense plastic with free spinning wheels. The Castor can pick up hair and strings making it harder for it to spin. The Castor should be replaced if it will no longer turn freely or has become damaged in a...Read moreny other way. Four of these Castors are used on each heater. It is suggested to replace all of them at the same time.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Rocker Switch wore out after 20 + years.
3 of 3 peoplefound this instruction helpful.
John from MACON, GA
Really Easy
15 - 30 mins
Pliers, Screw drivers
One phillips head screws, remove. Take cover off and flip over. Pull of six electrical leads from switch posts with needle nose pliers. Remove switch by pinching in both side release plastic hinges. May be tricky, may need needle nose pliers here. Replace switch from manifold front side. Install switch dots down facing wheels. Reattached
... Read moreleads, fasten back manifold with screw. Your ready.