EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3104 - Overview

Models starting with 3104

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Nut-lock, Ni – Part Number: 3296-42
$6.55
In Stock
Nut-lock, Ni
Part #3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.
Gasket-fuel Tank – Part Number: 272409S
$6.40
In Stock
Gasket-fuel Tank
Part #272409S
This fuel tank gasket is an OEM part certified by the manufacturer, and it provides a seal on the gas tank and carburetor of your machine. This fuel tank gasket is gray in color and made of composite materials. It is sold individually and is not part of a kit or assembly. Over time, the gasket can become damaged due to fatigue or wear, or it can dry out and the seal will fail. If you notice fuel leaking from the fuel tank gasket, it is time to replace it. This is a medium-difficulty repair that requires a wrench, sockets, and a screwdriver. You will look to reinstall your new part between the carburetor and gas tank. Note that if your carburetor and tank are separated for any other repairs or maintenance, you will also need to replace your fuel tank gasket regardless of condition, as it is a one-time use.
Tube-pick Up – Part Number: 391813
No Longer Available
Tube-pick Up
Part #391813
Genuine Manufacturer Approved replacement part used on a variety of Engines. This is a tube pick-up for 3-5HP horizontal and 5HP vertical engines with 2 and 3 quart tanks and a pulsa jet carburetor. This part is made out of Plastic and it is Sold Individually.
Seal-oil – Part Number: 299819S
$7.47
In Stock
Seal-oil
Part #299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should be replaced. Installation is rated as "Medium" difficulty by customers, and will require a screwdriver, wrenchset and seal puller. Refer to your make, model and diagrams to ensure you've chosen the correct part. This model comes in black and grey.
Gasket-intake – Part Number: 27355S
$6.40
In Stock
Gasket-intake
Part #27355S
This is an authentic manufacturer sourced replacement part designed for use with a variety of lawn and garden equipment. This carburetor intake gasket which provides an air tight seal for the carburetor. Over time gaskets tend to deteriorate and would need to be replaced. It is made out of compound material and it is sold individually. You would need a screwdriver to replace this item.
Gasket-crkcse/015 – Part Number: 692213
$6.40
In Stock
Gasket-crkcse/015
Part #692213
The Crankcase Gasket (.015) is a manufacturer-certified part which is rated as being "Medium" difficulty to install. It will require a screwdriver, socket set, wrench set, and nut driver. It s used to provide an air seal between the crankcase and the cylinder assembly. If broken, there will be oil leaking, and the part should be replaced. Refer to your make, model and diagrams to check if this is the right part for you. This part is made of a composite of materials, and comes in gray.
Nut-lock, Ni – Part Number: 3296-29
$6.55
In Stock
Nut-lock, Ni
Part #3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.
Engine Screw – Part Number: 692198
$8.01
In Stock
Engine Screw
Part #692198
This OEM engine screw is a genuine Briggs & Stratton replacement fastener designed for secure, vibration-resistant attachment of engine components in small gasoline engines and outdoor power equipment. Manufactured to exact factory specifications, it provides proper thread engagement and clamping force to help prevent loosening, reduce vibration, and maintain long-term engine reliability under operating stress. Built with durable, corrosion-resistant materials for extended service life, it is an ideal replacement when original screws are missing, stripped, or worn, helping ensure safe assembly, consistent performance, and proper engine operation.
Spring-governor – Part Number: 796260
$7.78
In Stock
Spring-governor
Part #796260
The governor spring is made out of metal and helps to control the speed of the engine. This authentic item is supplied directly from the original equipment manufacturer for use with Briggs & Stratton generators and Toro snowthrowers, tillers, and blower-vacuums. If it becomes lost or broken it will need to be replaced. A nutdriver may be necessary to help replace this part which is sold individually.
Filter-a/c Foam – Part Number: 27987S
No Longer Available
Filter-a/c Foam
Part #27987S
This air cleaner element is supplied from original manufacturer. It is specially designed for use with Briggs and Stratton engines used on lawn and garden equipment. It is used to filter out dust from entering the carburetor and the engine. This filter element is made out of foam material and it is sold individually. Please note, the air cleaner cartridge is sold separately. Replacing this filter is a simple task that does not require any tools. • Unscrew the cover knob • Remove the cover • Remove old element • Secure the new element in place • Reassemble and test the unit
Fitting-grease – Part Number: 302-5
$6.55
In Stock
Fitting-grease
Part #302-5
Breather Assembly – Part Number: 791779
No Longer Available
Breather Assembly
Part #791779
This is a Briggs & Stratton and Toro replacement part directly sourced from the manufacturer for use in engines, generators, tillers, blower-vacuums, and lawn mowers. The breather assembly is made of metal and helps to vent the air from the engine. It might require a socket set, a set of pliers, and a screwdriver to replace this part if it becomes broken. The part is sold individually but also includes the gasket-breather.

Watch our pros, then fix it yourself.