EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3102 - Overview

Models starting with 3102

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Nut-lock, Ni – Part Number: 3296-29
$6.55
In Stock
Nut-lock, Ni
Part #3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.
Bearing-ball – Part Number: 38-7820
$21.48
In Stock
Bearing-ball
Part #38-7820
This metal ball bearing reduces friction and evenly distributes weight among the rotating parts in your lawn equipment. These bearings can be found in various areas such as the wheels, in pulleys, blades or augers. When the bearing is damaged, you may notice a few things. Your machine may produce rough or grinding noises and excessively play or wobble. The affected part may also become stuck. Immediate replacement is necessary to prevent increased friction, inefficient performance, and potential equipment failure. Removing the bearing depends on your model, so consult your user manual for guidance. You will need to use a screwdriver or pliers to remove the surrounding components around the bearing and a bearing puller, pry bar, or mallet to release the bearing itself from its housing. As ball bearings wear out together, it is advisable to replace all of them at once. Ensure you verify the number of bearings your machine needs before purchasing this OEM replacement part as it is sold individually.
Fitting-grease – Part Number: 302-5
$6.55
In Stock
Fitting-grease
Part #302-5
Washer-flat – Part Number: 3256-24
$6.55
In Stock
Washer-flat
Part #3256-24
This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.
Term – Part Number: 849314
$6.40
Special Order
Term
Part #849314
Genuine OEM Replacement Part used on a variety of Power Equipment. This part is made out of Metal and is Sold Individually. Terminal Eyelet allows you to safely and easily secure a wire to the needed part of the tool using only a screw.
Washer-lock – Part Number: 3253-4
$6.55
In Stock
Washer-lock
Part #3253-4
The lock washer goes next to the flat washer and is made of metal. It is available as an individual replacement part. This genuine item is supplied by the original equipment manufacturer for use with snowblowers made by Toro and Lawn Boy. A wrench might be helpful during the installation of this part. This item may become broken and will need to be replaced.
Washer-flat – Part Number: 3256-3
$6.40
In Stock
Washer-flat
Part #3256-3
This replacement flat washer is sourced directly from the original equipment manufacturer, it is specially designed for use with Toro riding lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure a tight fit, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.
Washer-flat – Part Number: 3256-23
$6.55
In Stock
Washer-flat
Part #3256-23
This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your models part diagram to confirm the washers compatibility and usage. The flat washer is priced individually.
Screw-hh – Part Number: 322-6
$6.55
In Stock
Screw-hh
Part #322-6
It is an authentic OEM part that is specially made for use with Toro and Lawn Boy snowthrowers. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. It is one of the screws utilized to secure the upper and the lower handles. This high-quality component is made of durable metal and is sold as an individual item. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application. A wrench will be needed to perform this repair.
Seal And Gasket Kit – Part Number: 6-1925
No Longer Available
Seal And Gasket Kit
Part #6-1925
This seal kit is an authentic Chapin replacement part, not an aftermarket imitation. Seals and o-rings can wear out over time, it is recommended to replace worn seals, and o-rings to maintain sprayers. This kit is sold individually, the components of the kit may not be available individually, please see model diagram, or parts list.
Nut Locking Pin – Part Number: 31650
$6.40
In Stock
Nut Locking Pin
Part #31650
It is an authentic OEM part that is specially made for use with Ridgid vises. The nut locks the swivel nut in the base assembly. It is an identical replacement for a faulty or a missing hardware that was installed on a new unit. This high-quality component is made of durable metal and is sold as an individual item. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application.
Screw-hh – Part Number: 322-3
$6.40
In Stock
Screw-hh
Part #322-3
This is an authentic replacement part manufactured for use with Toro snowthrowers. The special hex head screw is used with a variety of different snowthrower models and has multiple applications. This screw is available as an individual replacement part, please see model diagram for associative parts.

Exact Part matches for your search term

Pad felt polishing – Part Number: 3102
No Longer Available
Pad felt polishing
This part number matches the current model number 3102
Part #3102
ELBOW SST 90 DEG .375 OD – Part Number: 3102
$22.33
Special Order
ELBOW SST 90 DEG .375 OD
This part number matches the current model number 3102
Part #3102

Watch our pros, then fix it yourself.