30860 (2010andAfter) Toro Chainsaw - Overview

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

This OEM hex nut secures the blower impeller assembly to the motor drive shaft. This part is black, made out of metal, and is sold individually. Hex nut threads can become damaged, and ends can become rounded off over time. This is a symptom of fatigue and will require replacement. You will know this part is broken if the impeller is no l...Read moreonger able to spin with the drive shaft. There will be no airflow from the blower. Most of our customers rated this as an easy repair, all you will need is a wrench or socket and torque wrench. When installing your new hex nut on the impeller blower, ensure your torque to the manufacturer specs when securing it to the drive shaft.

The flat washer is an OEM replacement part that provides a wide surface area to distribute the load of a bolt or a screw when it is installed. This protects the part being fastened from getting damaged or deformed and provides a more secure fit for the bolt/screw. This flat washer is made of steel and has a diameter of 0.375 inches and a ...Read morethickness of approximately 0.063 inches. To replace the flat washer, first unthread the bolt/screw before using a flathead screwdriver to carefully pry it off. Clean the area, place the new flat washer in position, and thread the bolt/screw back on. Sold individually.

This authentic manufacturer-sourced component is made for use with snowthrowers. The lock nut is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your specific model for the correct location and application of this part. Note, the lock nut is designed to resist loosening wh...Read moreen it is properly secured. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an authentic Toro replacement part. The flat washer is commonly found in a variety of Toro yard machines such as lawn mowers and snow throwers. The flat washer is generally used to provide space and protection between a nut or bolt head and a housing. Please be aware that there are different washers used in the machine. Refer ...Read moreto the parts diagram to be sure of ordering the correct part. You may require a wrench, screwdriver, or pliers to replace this item. This part is sold individually.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal washer is commonly used to disperse pressure put on the auger housing by the nut that fastens the chute retainer across a wider surface area. This bolt is sold individually.