30838 Lawn Mower - Overview

This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened by a knob on the other end. It is made of metal, is black, and is sold individually, not as part of a kit or assembly. This part will need ...Read moreto be replaced when it is worn or damaged and can no longer secure the arms together. No tools are needed to complete this repair. Customers rated this repair as Easy.

This is a genuine OEM sourced replacement part used on lawn mowers. Mulching blades are designed to circulate the grass longer so it can be cut into smaller pieces. This makes your grass clippings better as mulch since the smaller clippings will decompose more quickly, releasing their nutrients into the soil. This part is made out of meta...Read morel and it is sold individually. To replace it you would need a wrench to remove the nut that secure the blade.

This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.

This is an OEM replacement part for various models of lawn mowers. This part connects the blade to the shaft, is made of metal, is silver, is not part of a kit or assembly, and is sold individually. It will be found on the shaft of the mower, where the blade attaches. If your blade can no longer be supported and held on the machine, you ...Read moreshould inspect the Blade Adapter for signs of wear or damage, replacing it if you find any. You will need a socket set and wrench set to complete this repair. Customers rate this repair as Easy.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This item is an authentic replacement part that is intended to be used with walk-behind lawnmowers from Husqvarna, Poulan, and Jonsered. The rear skirt attaches to the rear of the mower's deck and is used to evenly spread grass as the mover passes. A wrench and hex socket set may be needed to install this item. The rear skirt is sold as an individual replacement part.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of h...Read moreigh-quality metal and it is sold individually, you will need a wrench to secure or remove it.

This is a genuine OEM sourced part that is specially made for use with Husqvarna and Weed Eater lawn mowers. It is the cable that stops the blade when the control handle is released. Unfortunately, if the cable is broken it will cause the brake to not release even when the lever is pressed. Please make sure to refer to the owners manual a...Read morend the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality rubber insulated cable is sold individually.

This is an authentic replacement part manufactured for use with Husqvarna walk-behind lawnmowers. The metal baffle fits into the front of the deck to protect the front end of the mower deck. This baffle is sold as an individual replacement part, please see model diagram for associative parts.