30761 Toro - Overview

This is an authentic OEM self-tapping bolt used on Toro snow throwers/blowers. It is designed to secure the bushing/gear case assembly together. By using a wrench and a self tapping bolt, precisely fitted threads are created in the opening of the case. This allows for the two part to be secured tightly together. Please note this bolt is sold individually.

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

The Lock Nut is used to secure and lock parts in place. This is a gold, metal, individually sold part which can be installed with a wrench set, and socket set, and attaches onto various locations on a variety of equipment. If broken, damaged or worn, the part may be loose, and there may also be physical damage to the nut, at which time it...Read more should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This is an original Toro replacement part manufactured for use with snowthrowers. The special push on retainer fastens the handle grip to the chute crank rod. This push on retainer is sold individually, please see model diagram for additional parts.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

The lock washer goes next to the flat washer and is made of metal. It is available as an individual replacement part. This genuine item is supplied by the original equipment manufacturer for use with snowblowers made by Toro and Lawn Boy. A wrench might be helpful during the installation of this part. This item may become broken and will need to be replaced.

This rubber oil seal is supplied directly from the original equipment manufacturer for use commonly with snowblowers and a variety of other outdoor power equipment. It can be used to retain gear oil, seal the transmission, and prevent it from leaking out of the engine. The seal keeps the rotating parts adequately lubricated and protects t...Read morehem from friction damage. The seal also prevents dirt and debris from entering and damaging the equipment components. Over time the rubber material may wear down or tear, leading to oil leakage, increased friction, overheating, and damage to the equipment. To replace the seal, first drain the oil and use a seal puller or flat screwdriver to remove the old seal. Clean the area thoroughly to ensure a good fit for the new seal and add a thin layer of oil around the seal. Align the new seal on the mounting surface and use a seal driver or socket to press the seal down until it is secure. Remember to refill your oil before starting your equipment again.

This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your...Read more model\\\'s part diagram to confirm the washer\\\'s compatibility and usage. The flat washer is priced individually.