3070 - Overview

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This is an authentic item that is supplied by the original equipment manufacturer for use with Toro lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this i...Read moretem. Keep in mind this high-quality nut is made of durable metal and is sold individually.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

The flat washer is an OEM replacement part that provides a wide surface area to distribute the load of a bolt or a screw when it is installed. This protects the part being fastened from getting damaged or deformed and provides a more secure fit for the bolt/screw. This flat washer is made of steel and has a diameter of 0.375 inches and a ...Read morethickness of approximately 0.063 inches. To replace the flat washer, first unthread the bolt/screw before using a flathead screwdriver to carefully pry it off. Clean the area, place the new flat washer in position, and thread the bolt/screw back on. Sold individually.

The lock washer goes next to the flat washer and is made of metal. It is available as an individual replacement part. This genuine item is supplied by the original equipment manufacturer for use with snowblowers made by Toro and Lawn Boy. A wrench might be helpful during the installation of this part. This item may become broken and will need to be replaced.

It is made of metal and is sold individually. The screw connects to the idler pulley. A socket set might be needed during the installation process. Over time this part may become stripped and will need to be replaced. This part is an OEM from Toro and Lawn Boy for use in snowthrowers, tillers, blower-vacuums, and lawn tractors.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your...Read more model\\\'s part diagram to confirm the washer\\\'s compatibility and usage. The flat washer is priced individually.

It is an authentic manufacturer-sourced component which is specially designed for use with Toro snowblowers. This replacement flat washer has multiple applications, please make sure to check the appropriate diagrams of your model for the correct location and use of this hardware. It is a high-quality part is made of durable metal and is sold individually.

It is an authentic OEM part that is specially made for use with Toro and Lawn Boy snowthrowers. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. It is one of the screws utilized to secure the upper and the lower handles. This high-quality component is made of durable metal and is sold a...Read mores an individual item. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application. A wrench will be needed to perform this repair.

This authentic replacement part is supplied directly from the original equipment manufacturer for use with Toro lawn and garden equipment. It is an identical replacement for a missing or a faulty carriage bolt that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and...Read more application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an OEM part sourced directly from the manufacturer. The diode is designed for use in Toro lawn tractors. This part is made of metal and high-quality plastic, and is an electrical component that is attached to the relay to help control the flow of electricity through the machine. You may require a wrench or screwdriver when replacing this part. This item is sold individually.

This is an authentic replacement part manufactured for use with Toro snowthrowers. The special hex head screw is used with a variety of different snowthrower models and has multiple applications. This screw is available as an individual replacement part, please see model diagram for associative parts.