This fuse, also known as a cartridge fuse, is a genuine OEM replacement part for microwaves. It has a glass cylindrical body with a metal cap on each end. The cap connects the fuse to the circuit. If the current goes above the fuse rating, the element inside the glass will melt and cut off the electrical current to the appliance. This pro...Read moretects the circuit and surrounding components from overheating and becoming damaged. Once the fuse is blown, the appliance will likely not operate at all, however, the fuse is designed to be easily replaceable. It is recommended to use insulated gloves and to avoid touching any exposed wiring connections. To replace the fuse, use a fuse puller to grip the metal caps and lift it out of the holder. Place the new fuse in the holder and ensure it is properly seated. Turn the appliance back on and check that the circuit is functioning.
This part is known as a grease filter and it is used in conjunction with your microwave. The purpose of this filter is to trap grease and other cooking residue from the exhaust air while cooking. The part is 7.5 inches wide by 5 inches deep, is metallic silver in color, and is sold individually. Because the vent hood filter collects greas...Read moree particles from the air while cooking, we recommend that you thoroughly wipe the area down before putting in your new part. You will not need any tools to make this installation.
This OEM waveguide cover in your microwave is a heat-resistant component that prevents food, grease, and moisture from entering the waveguide. It is typically located on the side or top wall of the cooking chamber. If the cover is broken, you may notice cracks, charring, or burns, and potentially see arcing or sparks during operation. Not...Read more replacing a damaged cover can lead to short circuits and the risk of electrical components touching your food. To remove the cover, start by disconnecting the microwave from its power source before opening its door. The waveguide cover is slotted or snapped into place, so gently slide or apply pressure to release it from the clips or slots. Please note that the cover is sold individually.
This microwave door switch works with the door latch to control when the appliance can run, a worn switch may cause the microwave to lose power, fail to start, or trip a breaker, it fits select upper and lower switch locations, high voltage may remain inside the microwave after power is removed, use a trained technician for installation, confirm fit with the exact model number.
This adapter is a replacement connection component designed to join or transition between different system elements. It supports proper flow or connection stability and is commonly replaced when cracked, leaking, or damaged.
A loose door, repeated clicking, or intermittent operation can indicate a damaged latch body or switch holder. The housing aligns the safety switches with the door hooks and helps prevent operation while the door is open. First inspect the latch opening, door alignment, mounting tabs, and switches to identify every damaged component. Matc...Read moreh the replacement to the microwaves full model number and verify what the assembly includes. Unplugging does not remove the high-voltage capacitor hazard, so professional service is recommended. Do not test the appliance with covers removed or safety interlocks bypassed.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave tripped circuit breaker when turned on
41 of 68 peoplefound this instruction helpful.
Arthur from LUTZ, FL
Easy
15 - 30 mins
Screw drivers
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
Was this helpful?
Thank you for voting!
Power would not come on, would trip breaker when connected.
18 of 28 peoplefound this instruction helpful.
JOSEPH from MIAMI, FL
Easy
15 - 30 mins
Screw drivers
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear
... Read morewhich was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
Read less
Was this helpful?
Thank you for voting!
Pressing the start, microwave will start and dies out. Electric is tripping.
11 of 18 peoplefound this instruction helpful.
ARNEL from WAUKEGAN, IL
Easy
15 - 30 mins
Screw drivers
The diagnosis is about an hour. Coz, I need to open the control panel, got a tester, and trsted all critical parts inside the panel. Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.
When found out the problem, the rest of t
... Read morehe work is easy.