30385 Toro - Overview

This oil seal is an OEM replacement part designed to prevent oil from leaking from the engine or gearbox while keeping contaminants from entering. It is used in various lawn mowers where it ensures that the moving parts in the mower remain adequately lubricated and protected from dirt/debris. The oil seal can wear down due to aging, heat,...Read more pressure, or improper installation. If the seal is no longer functioning oil will leak, the engine will overheat, and its internal components will wear down due to excessive friction. Use seal pullers to remove the seal from its housing on the engine crankshaft or transmission housing. Clean the surrounding area using a cloth or soft brush to prevent contamination and ensure a good seal. Apply oil to the lip of the new seal and firmly press into position until it is flush against the sealing surface. Once you have completed the repair, run the lawn mower to check that there are no longer any leakage or performance issues.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with lawnmowers and lawn tractors. The metal hex nut is used with different models of lawnmowers. The application of the nut can vary based on the model of the machine. It is recommended to review your model's part diagram to confirm th...Read moree nut's compatibility and usage. This item is sold as an individual replacement part.

The Lock Nut is used to secure and lock parts in place. This is a gold, metal, individually sold part which can be installed with a wrench set, and socket set, and attaches onto various locations on a variety of equipment. If broken, damaged or worn, the part may be loose, and there may also be physical damage to the nut, at which time it...Read more should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

This is an authentic Toro replacement part. The inner tube is designed by the manufacturer for use in lawn tractors and riding mowers. This part is made of inflatable rubber, and includes the attached inflation valve. It is placed inside the wheel and tire assembly to provide a smoother ride. You may require a screwdriver when replacing this part. This item is sold individually.

This replacement flat washer is sourced directly from the original equipment manufacturer, it is specially designed for use with Toro riding lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure a tight fit, please refer to the appropriate diagrams of your model for the correct location an...Read mored application of this hardware. Keep in mind this durable metal washer is sold individually.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your...Read more model\\\'s part diagram to confirm the washer\\\'s compatibility and usage. The flat washer is priced individually.

The thrust washer is made of metal and goes next to the spring washer. This is a genuine replacement part sourced from the original manufacturer for use with lawn tractors made by Toro and Lawn Boy. This item is available as an individual replacement. During the installation process, a screwdriver might be needed to replace this part. It will need to be replaced if it breaks.

This is a genuine manufacturer sourced replacement lock nut which is specially designed for use with Toro snowthrowers. It is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this part. Keep in mind this high-quality nut is made of durable metal and is sold individually.

This retaining ring is compatible with several different types of outdoor power equipment models. Made of metal, this ring is used to secure various shafts within your equipment, so check with your user manual for exact placement of the retaining ring. This ring is a genuine OEM part and is sold individually, so ensure you are ordering the right number of parts for your needs.