30162 Toro - Overview

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

It is an authentic manufacturer-sourced component which is specially designed for use with Toro lawn and garden equipment. The spacer helps to provide a tight fit between connected components. This part is made of high-quality metal and is sold individually. Check the diagrams for your model to ensure the correct repair procedure. A wrench set might be needed to replace this spacer.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

This is an authentic replacement part manufactured for use with Toro snowthrowers. The ni lock nut is designed to prevent from being unthreaded from vibration. This nut is used with several different models of snowthrowers and is used with various applications. The nut is sold as an individual replacement part, please see model diagram for associative parts.

The lock washer goes next to the flat washer and is made of metal. It is available as an individual replacement part. This genuine item is supplied by the original equipment manufacturer for use with snowblowers made by Toro and Lawn Boy. A wrench might be helpful during the installation of this part. This item may become broken and will need to be replaced.

This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.

It is an authentic manufacturer-sourced component which is specially designed for use with Toro snowblowers. This replacement flat washer has multiple applications, please make sure to check the appropriate diagrams of your model for the correct location and use of this hardware. It is a high-quality part is made of durable metal and is sold individually.

A deck wheel that drags, wobbles, or has a flat spot may no longer protect the turf correctly. The smooth roller touches the ground when the mower deck passes over a raised area, helping prevent the blade from cutting deep patches. Check deck level and tire pressure first because poor adjustment can also cause scalping. Match the replacem...Read moreent using the complete mower model and serial number, and compare the bore, width, bracket spacing, and required hardware. Shut off the engine, remove the key, set the parking brake, and disconnect the spark plug before service. Support the deck securely, tighten the fastener properly, and make sure the wheel turns freely.

This lock nut is used to secure threaded fasteners, to prevent them from loosening and falling off during use. It is sourced from the original manufacturer for use in various lawn and outdoor equipment. The nut has a nylon insert on one end which holds the fastener and locks the nut in position. It comes in a hexagonal shape, which makes ...Read moreit easier to grip, and ensures better stability. It is normal for a lock nut to corrode, crack or wear down over time. You will likely notice increased vibration, noise, and instability from your equipment when the nut is no longer able to securely hold the fastener. To remove and replace a lock nut, nut use a wrench or socket. Regularly inspecting and replacing the lock nuts in your equipment is important in maintaining the longevity of the equipment. Each nut is sold individually.