300S - Overview

The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy. The part attaches inside of the fuel tank and is used to clean the fuel of debris. It should be changed regularly. Check your owners manual for the recommended replacement schedule for your engine. ...Read moreIf the fuel is leaking or their is a blockage, you will know the part is broken and will likely need to be replaced. To check for small leaks, feel around for dampness and the smell of fuel.

This is an original part from the Echo manufacturer. The metal nut 8 is compatible with a variety of tools and engines. It is recommended to refer to specific manual and diagrams for repair instructions. This part is sold individually. A wrench is often needed in the repair.

This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install. You will know you need a new one if there is a leak around the hose where this clip is used to secure it, or if the fuel line detaches.

This is a genuine manufacturer sourced replacement part that is specially designed for use with Shindaiwa chainsaws. It is used to provide an air-tight seal for the gas cap. Over time gasket material may deteriorate and crack eventually requiring replacement. This part is made of high-quality composite material and it is sold individually.

This item is available as an individual replacement part. The adjusting stud attaches to the guide plate and is made of metal. A screwdriver may be helpful when replacing this part. This item may become broken and will need to be replaced. This is an Echo and Shindaiwa replacement part directly sourced from the manufacturer for use in chainsaws.

The OEM M8 Lock Washer (Spring Washer 8) is an 8mm silver, metal part. It can be installed with a wrench set and socket set. It prevents bolts or nuts from loosening. If broken, the bolt or nut it is securing as well as the part may be loose. If this happens it should be replaced. Refer to your make, model, and diagrams to ensure this is the correct part.

The metering diaphragm fits between the metering diaphragm gasket and the air purge body assembly. This part is available individually and is made of a thin material that can break easily. It is a genuine item that is supplied by the original equipment manufacturer for use with trimmers, edgers, blowers, and chainsaws made by Echo and Shindaiwa. A screwdriver may be needed when replacing the diaphragm.

This is an authentic replacement part manufactured for use with outdoor power equipment. The diaphragm gasket seals the carburetor and fits between the carburetor and the diaphragm. It is recommended to replace the gaskets when servicing the carburetor to ensure good seals when it is reassembled. This gasket is sold as an individual replacement part.

This is an original replacement part manufactured for use with outdoor power equipment. The strainer is used with many different types of equipment and is commonly used in the carburetor fuel system. This strainer is available as an individual replacement part, please see model diagram for part location and usage.

This is an authentic OEM sourced replacement part which is specially designed for use with on Shindaiwa lawn and garden equipment. Its purpose is to filter out dust and debris from contaminating the carburetor and the engine, over time it may get clogged eventually requiring a replacement. Please note this high-quality component is sold individually.