This is a genuine manufacturer sourced replacement part used on Ridgid pipe and bolt threading machine. It includes two (2) carbon brushes with lead wires attached and two springs. lease note brush holder is sold separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear ...Read moreitems, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a screwdriver to complete this job.
It is a genuine component which is supplied by the original equipment manufacturer for Ridgid pipe and bolt threading machines. This special cutter wheel is designed to cut steel and ductile iron. A dull or a damaged cutter wheel will increase required force, produce poor results and increase the risk of injury. On a monthly basis (or mor...Read moree often if needed) lubricate all exposed moving parts (such as carriage rails, cutter wheels, cutter feed screw, jaw inserts and pivot points) with a light lubricating oil. Wipe any excess oil from exposed surfaces. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. Note, this high-quality cutter is made of durable metal and is sold individually.
This replacement brush cap set is an authentic item that is sourced directly from original equipment manufacturer for use with Ridgid pipe and bolt threading machines. It is a high quality item that is specially designed to secure carbon brushes in the brush holder. Please note this set includes two durable plastic caps per order that will require a flat-head screwdriver to secure or remove these items.
It is a genuine item which is supplied directly from the original equipment manufacturer for use with Ridgid equipment. This is one of the special grommets utilized to provide a tight seal between connected components. If the part is missing or is damaged, this will provide an identical replacement for the original item that was installed...Read more on a new unit. This high-quality grommet is made of durable rubber and is sold in a pack of five. A wrench set will be needed to perform this repair. Check the appropriate diagram for your model for the correct application.
This is a genuine manufacturer-approved replacement part which is specially designed for use with Ridgid pipe and bolt threading equipment. It is an identical replacement for a missing or damaged wheel that was originally installed on a new unit. This high-quality component is made of durable metal with rubber and is sold individually, please note the hardware to secure it is sold separately.
It is an authentic manufacturer supplied replacement hardware that is specially made for use with Ridgid pipe and bolt threading machines. This pack includes six durable metal screws, the purpose of these screws is to secure the centering head. You will need a flat-head screwdriver to secure or remove this item.
The heavy duty cutter wheel attaches to the frame assembly and helps to make cuts in pipes. It is sold individually and is a genuine OEM sourced part which is specially designed for use with Ridgid tubing cutters. The cutter wheel is made out of metal and will require replacing if it breaks.
This authentic item is supplied directly from the original equipment manufacturer for use with Ridgid equipment. Washers are generally utilized to provide a tight seal between connected components, unfortunately, over time they will wear out or might simply get lost eventually requiring a replacement. Please make sure to refer to the appr...Read moreopriate diagrams of your model for the exact location and use of this washer. Keep in mind this durable component is made of high-quality metal and is sold in a pack of five.