3000 (F013300000) Dremel Hammer Drill - Overview

This replacement power cord is supplied form original equipment manufacturer. It is specially made for Dremel rotary multi-tools. I plays a key role by delivering the electricity from the outlet to the tool. This cord is rubber insulated and it is sold individually. It does include a rubber grommet/sleeve. To complete this repair you wo...Read moreuld need a screwdriver. • Remove housing screws • Remove the housing • Disconnect wires from the old cord • Remove old cord • Secure the new power cord in place • Reattach wires • Reassemble and test the unit

It is a genuine item that is supplied by the original equipment manufacturer for use with Dremel rotary tools. This item provides an identical replacement for a missing or a faulty nose cap that was installed on a new unit. Please make sure to refer to the owners manual and the appropriate diagram of your model for the correct application...Read more of this component. It is a high-quality part which is made of durable materials and is sold individually. Keep in mind the #2615000480 Collet-1/ 8 and the #2610014582 Collet Nut are both sold separately.

This is a Genuine replacement part designed for Dremel Rotary Tool. It helps to lock the the Spindle Shaft. It is Made out of Metal and it is Sold Individually. This Assembly includes a Collar and a Pin. To complete the repair you would need a Hex Key/Allen Wrench.

This is a genuine OEM replacement part, it is sold as a set (2)Two Brushes and two Brush Springs. Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most com...Read moremonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This genuine OEM sourced replacement armature and bearing assembly that is specially made for Dremel rotary tools. The armature is one of the main components inside an electric motor, in combination with the motor's field it creates a magnetic field, which causes the armature to rotate. It is a complete assembly which includes a high-qual...Read moreity metal armature, a plastic fan, armature bearing and commutator end bearing. It is highly recommended to replace both carbon brushes when replacing an armature. Please note this assembly is sold individually.

Genuine manufacturer sourced replacement switch used on Dremel rotary tool. It is an important part of the tool which handles on/off operations. Because switches have mechanical parts, they will tend to wear out over time, eventually requiring replacement. Switch has a plastic body and it is sold individually. To replace this switch you ...Read morewould need a Screwdriver. • Remove screws used to hold two pieces of housing set together • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

This is a genuine Dremel replacement part, it is sold individually. The purpose of the Collet Nut is to secure the collet with the bit of your choice in the shafts assembly of the Dremel tools shown below. By pressing on the lock assembly on the tool and using the wrench provided with your tool you can secure or release the Collet Nut.

This is a Genuine Manufacturer Approved replacement part used on some Dremel Rotary Multi-Tools. This part provides the firm grip for holding a bit in a tool. This Collet is for using bits with 1/8" arbors. Due to prolonged, heavy use a collet may need to be replaced. Collet Nut is sold separately.