This is a genuine manufacturer sourced replacement part used on Ridgid pipe and bolt threading machine. It includes two (2) carbon brushes with lead wires attached and two springs. lease note brush holder is sold separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear ...Read moreitems, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a screwdriver to complete this job.
It is a genuine component which is supplied by the original equipment manufacturer for Ridgid pipe and bolt threading machines. This special cutter wheel is designed to cut steel and ductile iron. A dull or a damaged cutter wheel will increase required force, produce poor results and increase the risk of injury. On a monthly basis (or mor...Read moree often if needed) lubricate all exposed moving parts (such as carriage rails, cutter wheels, cutter feed screw, jaw inserts and pivot points) with a light lubricating oil. Wipe any excess oil from exposed surfaces. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. Note, this high-quality cutter is made of durable metal and is sold individually.
This replacement brush cap set is an authentic item that is sourced directly from original equipment manufacturer for use with Ridgid pipe and bolt threading machines. It is a high quality item that is specially designed to secure carbon brushes in the brush holder. Please note this set includes two durable plastic caps per order that will require a flat-head screwdriver to secure or remove these items.
It is an authentic manufacturer supplied replacement hardware that is specially made for use with Ridgid pipe and bolt threading machines. This pack includes six durable metal screws, the purpose of these screws is to secure the centering head. You will need a flat-head screwdriver to secure or remove this item.
This is an authentic OEM part. The Ridgid oil pressure relief set is made for use with several compact pipe and bolt threading machines. This metal relief set is fitted in the carriage and oil system, and is sold individually. Pliers are helpful for the installation. Please refer to the manual for additional repair information.
This part is an OEM sourced directly from the manufacturer for use in threading machines by Ridgid. The centering head fits next to the scroll and the back plate. During the installation of this part, a screwdriver may be needed to help in the replacement. It will need to be replaced if it becomes broken. This is available as an individual replacement part.
This is an authentic part assembled by original manufacturer. It can be found in Ridgid power tools including drum machines and threading machines. Ball bearings buffer moving parts in order to reduce friction and secure rotational positioning. Bearings are commonly replaced due to their high wear functions. Sold separately.
This switch knob is used to operate the control switch on select pipe threading and drain cleaning machines, allowing you to easily choose forward, reverse, or off settings. Designed as a direct replacement for a worn or damaged knob, it helps restore smooth, reliable operation of the machine’s controls. Its durable construction ensures a secure fit and dependable performance during regular use.