This chrome drip pan is designed for gas cooktops and ranges. The pan has an approximate diameter of 8 inches, and the hole in the middle has a diameter of roughly 4 inches. The purpose of this part is to catch the drips and spills coming from the cookware on your stove. Burners are used frequently and these pans can get quite dirty. If y...Read moreours will no longer come clean, or if it is damaged, this is the replacement you need. Before putting the burner head assembly and burner grate back on, make sure the drip pan is flush with the cooktop. When repairing your range or cooktop, make sure it is unplugged and the gas is shut off.
This is a burner grate for your surface burner, and it is compatible with your range stove top. The purpose of this part is to provide a balanced and stable surface for you to set your cookware on while cooking on your stove. The color of the burner grate is black, and it has a diameter of 6.5 inches. This part is sold individually and in...Read morecludes only one round gas grate per package. The most common reason for needing to replace this part is if your current burner grate has incurred damage from daily usage.
This flat style gas oven igniter is 5.53 inches long and comes with a bracket and wire nuts. Its amperage range is between 3.2 and 3.6 amps. May be different in appearance but will function as the orginal part.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ignitor burnt out
14 of 18 peoplefound this instruction helpful.
Gregg from Naukati, AK
Really Easy
15 - 30 mins
Nutdriver, Screw drivers
I removed the broiler burner assembly held in by 5 screws across the inside top of the oven, as I removed the assembly the igniter slid out from the back of the oven and was attached to the assembly with a cannon plug, I disconnected the cannon plug and removed the whole assembly out of the oven and replaced the igniter which was attached
... Read more by two screws and reassembled in the oven. Where I live in remote Alaska calling a repair technician is not an option, either figure it out or have a new appliance barged in.
Read less
Was this helpful?
Thank you for voting!
Two top burners would not light, defective switch
12 of 14 peoplefound this instruction helpful.
Donald from Middle Village, NY
Easy
Less than 15 mins
Screw drivers
Warning- we found a lot of bare wires in this stove, check your wires before replacing the bad switches. I lifted the top, disconnected the power, pulled off the knobs, unscrewed the switch for the back light, removed seven screws to finally get the front panel off. Once you have the front panel off, changing the swich takes less than a m
... Read moreinute. The switches just slide off the gas valve stems. Instructions show how to line up the new D-shaped switch mechanism to match the D-shaped shaft. Gently pull the two wires off the old switch and slide onto the new switch. Then put the panel back.
Read less
Was this helpful?
Thank you for voting!
Very old burner grates & drip pans, need replacement.
15 of 23 peoplefound this instruction helpful.
Mariano from Torrance, CA
Really Easy
Less than 15 mins
Took out the old & easily replace it with the new set. No tools required.