This chrome drip pan is designed for gas cooktops and ranges. The pan has an approximate diameter of 8 inches, and the hole in the middle has a diameter of roughly 4 inches. The purpose of this part is to catch the drips and spills coming from the cookware on your stove. Burners are used frequently and these pans can get quite dirty. If y...Read moreours will no longer come clean, or if it is damaged, this is the replacement you need. Before putting the burner head assembly and burner grate back on, make sure the drip pan is flush with the cooktop. When repairing your range or cooktop, make sure it is unplugged and the gas is shut off.
This is a burner grate for your surface burner, and it is compatible with your range stove top. The purpose of this part is to provide a balanced and stable surface for you to set your cookware on while cooking on your stove. The color of the burner grate is black, and it has a diameter of 6.5 inches. This part is sold individually and in...Read morecludes only one round gas grate per package. The most common reason for needing to replace this part is if your current burner grate has incurred damage from daily usage.
Just to point out the pans were delivered within a few days which was very quick. I just dropped them in. They fit perfect. Thank You for no stress.
Was this helpful?
Thank you for voting!
Oven igniter glows but does not light.
8 of 11 peoplefound this instruction helpful.
Peter G from Pine River, MN
Really Easy
15 - 30 mins
Screw drivers, Wrench (Adjustable)
I first unplugged the power cord and raised the range top and shut off gas supply to oven. then i removed the broiler drawer. Then using the adjustable wrench i loosened and removed the gas supply line from safety valve. Then using the philips head screw driver i removed the 2 screws holding the heat sheild surounding the valve. Then i u
... Read morenplugged the 2 wires on the valve body. then i removed the 3 screws from valve bracket and removed the valve. Install in reverse order and adjust gas orfice for proper burner flame using adjustable wrench. takes about 30 mins. I have done this repair once befor so i kinda knew what i was doing from the get go!!!! I had the new part i had ordered from this site in just 3 days!!!