EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

2960 - Overview

Models starting with 2960

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8009
$19.54
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(78)
Part #8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Surface Burner Element Switch, Large Burner – Part Number: WP3149400
$56.33
In Stock
Surface Burner Element Switch, Large Burner
★★★★★
★★★★★
(56)
Part #WP3149400
This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.
Square Chrome Drip Pan – Part Number: WPY0060872
$24.67
Special Order
Square Chrome Drip Pan
★★★★★
★★★★★
(2)
Part #WPY0060872
The drip pan is found under the burner. This square chrome stovetop drip pan is intended for use with gas ranges. It has a 4-inch diameter center hole and 7 3/4 inch sides. Drip pans should be cleaned regularly, and replaced when too much food has been burned and stuck to it, making it too hard to clean. You should replace your drip pan if it is rusted or damaged. Grease, oil, and food can spill into your unit and become a fire hazard. This drip pan is dishwasher safe and is sold individually.
Surface Element Switch – Part Number: W10900107
$47.40
In Stock
Surface Element Switch
★★★★★
★★★★★
(3)
Part #W10900107
A surface element switch, also known as a burner/infinite switch, is a device used to control and regulate the heat output of the burners on a stovetop or cooktop. This switch is controlled with a knob on the user interface of the cooktop or stovetop and is adjustable by the user. This burner switch is compatible with various ranges and cooktops and is a genuine OEM part that is sold with all of the necessary hardware to secure it, such as the Philips-head and flat-head screws, brackets, bolts, washers, palnuts (also known as a push-on nut) and terminals. Over time, this switch can wear out or become faulty, leading to heating issues for your stovetop and cooktop, such as not heating, overheating, or staying at the same heat level. Depending on the orientation of your cooktop, you will need to install this switch with or without the bracket and palnut, so reference your user manual for that information when replacing this switch. You will need a screwdriver and set of pliers during the replacement and installation process, and simply need to follow the instruction manual included with this switch to correctly replace and rewire it.
Infinite Control Switch, 6" – Part Number: WP3149404
$52.67
In Stock
Infinite Control Switch, 6"
★★★★★
★★★★★
(10)
Part #WP3149404
This surface element control switch, also known as an infinite switch, is a genuine OEM replacement designed for 6-inch electric burners on select ranges. It regulates the power supplied to the surface element, allowing precise control over heat levels from low to high. Compatible with models from Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, and other associated brands, this dual-coil switch is a common solution for issues such as burners that fail to heat, remain stuck on high, or cannot adjust temperature properly. If the burner heats intermittently or not at all, replacing the switch may restore proper function. Always disconnect power or turn off the circuit breaker before installation. Sold individually.
2 Piece Broiler Pan – Part Number: 4396923
$49.50
In Stock
2 Piece Broiler Pan
★★★★★
★★★★★
(6)
Part #4396923
This broiler pan and roasting rack set is designed to help reduce mess while cooking by allowing grease to drain away from food. Its durable porcelain-coated construction stands up to high temperatures and makes cleanup simple. With approximate dimensions of 16 3/4 inches long, 12 3/4 inches wide, and 1 3/4 inches high, it offers a convenient size for everyday broiling and roasting.
Gas Burner Grate – Part Number: WP314647B
No Longer Available
Gas Burner Grate
Part #WP314647B
This gas burner grate is used for some gas ranges and cooktops. This is a black burner grate with each side measuring almost eight inches. This part may become rusted or burnt over time if not properly taken care of or with excessive use. If you notice that your grate is discolored or blackening, it may need to be replaced. The surface burner grate provides a steady surface for your cookware that is placed on top of the surface burner. This is a genuine OEM part that is sourced directly from the manufacturer.
Range Suface Burner Ignition Switch – Part Number: WP4157180
$59.47
Special Order
Range Suface Burner Ignition Switch
★★★★★
★★★★★
(1)
Part #WP4157180
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
Oven Seal - Top or Bottom – Part Number: Y07623602
No Longer Available
Oven Seal - Top or Bottom
Part #Y07623602
This piece of oven door seal has a metal hook on each end. This seal is compatible with the top and the bottom of the oven door window.
Stack Kit – Part Number: W10869845
$67.82
In Stock
Stack Kit
★★★★★
★★★★★
(1)
Part #W10869845
Explore the convenience of saving space in your laundry room with the Whirlpool long vent dryer stack kit. Specifically designed to fit a selection of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef washer and dryer models, this is a genuine OEM part aimed at providing efficient, long-lasting performance. The stack kit is also compatible with hybrid dryers, broadening its use. It comes equipped with all necessary hardware and a comprehensive set of instructions to help you stack your dryer on your washer with ease. This product is found in the category of Whirlpool Dryer Parts on our website. Before placing your order, we recommend verifying the compatibility of the kit with your specific washer/dryer model, as size and shape variations may exist.
Surface Burners Spark Module Kit – Part Number: 1430322
No Longer Available
Surface Burners Spark Module Kit
Part #1430322
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
KNOB – Part Number: W11032824
No Longer Available
KNOB
Part #W11032824
This top burner knob is a little over two inches in diameter. It has a chrome strip of trim around the perimeter of the knob, as well as white lettering denoting the off, light, and high positions.

Exact Part matches for your search term

Clevis Pin, 3/8 x 2 – Part Number: 2960
No Longer Available
Clevis Pin, 3/8 x 2
This part number matches the current model number 2960
Part #2960
Liftr-shaker – Part Number: 2960
No Longer Available
Liftr-shaker
This part number matches the current model number 2960
Part #2960
Package jet – Part Number: 2960
No Longer Available
Package jet
This part number matches the current model number 2960
Part #2960
IGNITION CABLE – Part Number: 2960
$104.76
Special Order
IGNITION CABLE
This part number matches the current model number 2960
Part #2960
Assy, Kit, Fork, Shifter – Part Number: 2960
No Longer Available
Assy, Kit, Fork, Shifter
This part number matches the current model number 2960
Part #2960

Common Symptoms of models starting with 2960

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
the element did not turn compleatly off, the on light stayed on.
88 of 108 people found this instruction helpful.
  • chaz from fairplay, CO
  • Easy
  • 15 - 30 mins
  • Screw drivers
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. re moved each wire from the old switch and replaced them in the same position on the new switch. inserted new switch into the stove and attached the 2 screws. replaced back panel and pluged in stove. all tested well
Was this helpful?
Thank you for voting!
Burner would go high without warning
60 of 63 people found this instruction helpful.
  • John from Clinton, CT
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
We felt the only possible problem could be the switch assembly. I removed the switch panel, removed the wires from the old switch, one at a time, removed the old switch assembly and installed the new switch assembly. The extended stem did have to be snapped off (per your instructions) and that too was a very simple task.
Was this helpful?
Thank you for voting!
Left front burner would not adjust heat downward
35 of 40 people found this instruction helpful.
  • ALTON from ROUND ROCK, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers
Pull unit away from wall.
Unplug power
remove topmost four screws from rear metal cover
Pull knob off switch shaft.
Remove two screws holding switch to panel.
Break off shaft of new switch to correct length.
Remove each wire from old switch and attach to Corresponding lug on new switch.
Reattach the new switch to the panel and reverse the first four instructions.
Was this helpful?
Thank you for voting!