This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
This lower rack roller assembly supports and guides the lower rack as it slides in and out of your dishwasher. This assembly consists of two wheels that are mounted on a bracket and is usually found on the corners of the lower rack. If you have trouble smoothly sliding the lower rack or notice it getting stuck, the roller assembly may be ...Read moredamaged. It can also create scraping or squeaking noises during movement. A broken assembly can cause an unstable or wobbly lower rack, increasing the risk of dishes falling during the washing cycle. To replace a damaged assembly, remove the lower rack from the dishwasher and release the locking tab of the roller assembly using a flat-blade screwdriver. Install the new assembly by clipping it into place. Please note that this OEM assembly is sold individually, so it is recommended that you inspect all of them in your appliance and order the number it requires.
This is a pump motor, or single speed motor, and it works with your dishwasher. The motor pumps water to the spray arms, which is an important step because the spray arms will then use the water to clean the dishes during the cycle. Take note that this dishwasher motor does not include the seal kit or the relay kit. These kits will have t...Read moreo be purchased separately. You should disconnect the power to your appliance before servicing.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No Rinse cycle
3 of 5 peoplefound this instruction helpful.
Tim from Forest Grove, OR
Easy
Less than 15 mins
Screw drivers
Removed the front panel below door, 4 screws. Removed 1 screw that help relay on frame. Moved 3 wires from old relay to new. Installed relay to frame, installed panel and done.