284260A Frigidaire Range Parts & Repair Help | PartSelect
Models > 284260A

284260A Frigidaire Range - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(41)
PartSelect #:PS470129
Manufacturer #:5303935066
This is a flat style oven igniter used to light the oven burner in a gas range. When the element in this igniter glows white hot, the gas is released from the safety valves, which ...
$49.58
In Stock
(4)
PartSelect #:PS437923
Manufacturer #:316067902
Oven racks can become rusted or damaged from constant use, and need to be properly maintained and cleaned to keep them working properly. If you notice that your oven rack has been ...
$68.73
In Stock
(5)
PartSelect #:PS1765368
Manufacturer #:318228310
This is a red indicator light lens for an oven that covers the indicator light for the surface element. The indicator light signifies when the element is on and heated. This part i...
$12.94
In Stock
(2)
PartSelect #:PS9864838
Manufacturer #:5304494997
This includes pan and insert.
$62.11
In Stock
PartSelect #:PS436960
Manufacturer #:316022500
$34.57
In Stock
PartSelect #:PS468140
Manufacturer #:5303912606
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$73.01
In Stock
PartSelect #:PS438464
Manufacturer #:316091706
This valve automatically cuts off the flow of gas at a certain pressure.
$113.30
In Stock
(1)
PartSelect #:PS12585078
Manufacturer #:5304515659
Used with gas ranges.
$25.97
In Stock
PartSelect #:PS1528546
Manufacturer #:316495901
No Longer Available
(1)
PartSelect #:PS470131
Manufacturer #:5303935068
This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.
$45.97
In Stock
Questions and Answers for 284260A
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven quit heating.

  • Customer: John from Darlington, SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 555 of 602 people found this instruction helpful
After reading up on the problem of the gas oven not lighting I decided I needed to install a new igniter. I had read where some people just pulled a panel off the back and installed a new one.. yeah, no such luck with this model so I had to crawl into the broiler drawer space [which I had to clean out first]. Note, if you wear trifocal glasses you might as ... read more

Oven was difficult to light, then stopped lighting altogether

  • Customer: Ritchie from Ithaca, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 276 of 357 people found this instruction helpful
1. Turned off circuit breaker to stove
2. Removed the two screws holding down the floor of the oven (screws are at back.), and then lifted it out.
3. Removed the nut holding down the flame guard, and lifted it off.
4. Opened the bottom drawer.
5. Removed the protective cover in the back left of the oven at the bottom, first removing the ... read more

Oven Would Not Heat - Oven Ignitor Failure

  • Customer: Peter from Fife Lake, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 150 of 221 people found this instruction helpful
I first looked up my Model Number on PartSelect.com and looked at the schematic as well as Trouble Shooted my problem.

Reading the posts by others how they Removed, Replaced, and Repaired their Oven Ignitors, I used their helpful info, and of course did mine.

1. Unplugged my Oven/Stove.

2. Removed bottom storage door to ge... read more