272K (1997-01) Husqvarna Concrete Saw - Overview

Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not part of a kit or assembly. The spark plug is used to ignite the air-fuel mixture inside the combustion chamber. You may need to replace the...Read more Spark Plug if your 1 cylinder engine won't start, or if your more-than-1 cylinder engine runs rough. Spark Plugs will wear over time and should be inspected regularly. Customers rate this repair as Easy.

This fuel hose is a genuine OEM part designed to deliver fuel from your fuel tank to the carburetor. Also known as the fuel line, it is black in color, made of rubber, sold individually, and can be attached to your machine on the fuel tank and the carb. Over time, it is possible the line breaks due to wear or drying out. If you notice c...Read moreracks or leaking fuel, it is time to replace the fuel hose. This is an easy repair according to most of our customers, and does not require any special tools.

This M8 flange nut secures the guide bar and chain assembly in place, ensuring proper alignment and safe operation of your equipment. Designed with an integrated flange and anti-slip teeth to resist loosening from vibration, it provides a reliable, secure hold during heavy use. Made from durable, corrosion-resistant steel with an M8 threa...Read mored and 1.25?mm pitch, replacing a worn or missing nut helps maintain stability and dependable performance.

It is a genuine manufacturer-sourced component which is specially produced for use with Husqvarna and Poulan lawn and garden equipment. This replacement gasket is used to provide an air-tight seal for the fuel cap to prevent any leaks. Over time the material may begin to deteriorate and crack eventually requiring replacement. It is a high...Read more-quality component which is made of durable rubber material and it is sold individually.

This screw is an authentic OEM part which made for Husqvarna chainsaws. It is designed for multiple uses based on your tool. Please refer to diagrams for correct location and applied use of this screw. It includes one (1) metal screw per order. This is a hex head item so you would need a hex key/allen wrench to install or remove it.

This replacement screw is specially manufactured for Husqvarna power tools. It is a genuine OEM sourced hardware which has multiple applications depending on the model. Please make sure to check appropriate diagrams for correct use and location of this screw. Please note, this hex socket head screw is sold individually.

This is a genuine Husqvarna and Jonsered replacement part that has been sourced from the original manufacturer to be used with chainsaws, brushcutters, stump grinders, pruning saws, and power cutters. The sealing ring is used to provide spacing and to prevent oil leaks between the drive shaft and the cover panel. This item is sold as an individual replacement part.

This is an original Husqvarna replacement part manufactured for use with chainsaws. Some ignition models do not include the spark plug connector also called a spark plug boot, it is recommended to inspect the spark plug boot or replace it when servicing the ignition module. The rubber spark plug connection kit includes the coil spring. Th...Read moree coil spring has a sharp end that pierces the insulation of the ignition module\'s wire, and it is the coil spring that makes contact to the wire. This spark plug connection kit is sold individually.

This is a genuine OEM part. The Husqvarna square nut is compatible with many brushcutter devices. The metal nut helps to secure the suspension guide rail, and is sold individually. A wrench is required for the proper repair.

This switch is specially designed to stop the engine when you move it to the stop position/setting. It is an authentic replacement item that is supplied from original equipment manufacturer for use with Husqvarna chainsaws. Includes one (1) switch per order. To replace this stop switch you will need a screwdriver. • Make sure to disco...Read morennect spark plug and drain fuel • Remove screws from the housing • Separate housing pieces • Disconnect wires from the old switch • Secure new stop switch in place • Reconnect the wires • Reassemble and test the new switch

It is a genuine item that is supplied by the original equipment manufacturer for use with Husqvarna chainsaws and power cutters. This replacement gasket is used to provide an air-tight seal between the adaptor and the carburetor, please refer to appropriate diagrams for correct location and use of this item. It is a high-quality component...Read more which is made of durable composite material and it is sold individually, note over time gaskets tend to wear out and crack eventually requiring replacement to maintain a proper seal.

This screw is an authentic high quality item that is specially produced for use on Husqvarna power equipment. It is a standard hardware which has multiple uses depending on the unit, please refer to appropriate diagrams for correct location and use of this screw. Note that one hex socket head screw is included per order, you will need a hex key also known as an allen wrench to secure or remove this item.