2703X1 Makita Table Saw - Parts

Genuine Manufacturer Sourced replacement part used on a variety of Makita Power Tools. This is a Metal Pan-Head Screw and it is sold individually. This screws is commonly used to hold two pieces of Housing Set together.

This is a genuine Makita replacement part that includes two carbon brushes with wire leads attached. Carbon brushes are essential components in power tools and are among the most commonly replaced parts due to regular wear from friction. Over time, worn brushes can cause a motor to run poorly, operate intermittently, or lose electric brak...Read moreing power. Replacing them can often restore your tool’s performance. A worn brush may appear cracked, pitted, burned, or worn down near the wire lead. It’s always best to replace both brushes at the same time, even if only one shows signs of wear. When installing new brushes, be sure to inspect the armature for any damage such as burns or cracks, which could indicate more serious motor issues.

This replacement tapping screw is an authentic item that is supplied by the original manufacturer for use with Makita power tools. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this part. This high-quality phillips pan-head screw is made of durable metal and it is sold individually.

This cord is a genuine Makita replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Over time, power tool cords will wear out or become frayed. We recommend replacing a cord as soon as signs of wear are visible. Power Cord Specifications: • 2 Prongs • 2 Wires • 14 Gauge • 8 Feet Long

Genuine Makita replacement part, this item is sold individually. The purpose of the Brush Holder Cap is to retain the brush in the brush holder. This Brush Cap is used on all the Makita models listed below. It is removed by using a slotted screwdriver Do not press too hard when removing the cap they do have a tendency to break.

This is an original replacement screw designed for use with Makita power tools. This is a standard hardware which has multiple uses based on equipment. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. To secure or loosen this screw you would need a phillips head screwdriver.

This switch has 5 terminals an a safety lock system that prevents accidentally turning it on. This is a genuine Makita replacement part. Switches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Beca...Read moreuse switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows: • The tool has completely stopped functioning - it will not start. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all. • The variable speed function and electric braking aren't working properly.

This is a genuine Makita rip fence for model 2703 table saws. It is the complete rip fence assembly and is ready to clamp onto your saw. This rip fence will fit the model listed below, but will not work with any other table saws.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Makita table saws. It is an identical replacement for a missing or a damaged pressure plate that was installed on a new unit. The part helps to secure the safety guide, please make sure to refer to the appropriate diagrams of your model ...Read morefor the correct location and application of this component. Keep in mind this high-quality pressure plate is made of durable metal and is sold individually.

This pan head screw is an authentic replacement part. It is sourced directly from original equipment manufacturer for use with Makita power tools. This standard hardware is used in different locations depending on equipment. To ensure correct application please make sure to check appropriate diagrams. Includes one (1) metal screw. You will need a torx or a flat-head screwdriver to tighten or loosen this screw.