2690952 Simplicity Lawn Tractor - Overview

Shear Pins are designed to break off in order to prevent further damage to your machine. Because they are designed to break, we recommend having a few spares on hand. This part is made of metal, is silver, is not part of a kit or assembly, and is sold individually. A Shear Pin will break when you hit a large chunk or ice or other debris...Read more. Once it is broken, it will need to be replaced. You will need pliers to complete this repair. Customers rate this repair as Easy.

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

Designed for use in Snapper and Simplicity ride-on mowers, this Roller is sourced directly from the manufacturer, is made of durable black plastic, is 4 inches long, and sold individually. The Roller helps allow the deck to move over the lawn without gouging into the ground. When the Roller has broken, you will notice the deck starts to...Read more ground out. This part will wear over time and needs to be replaced if it is damaged or fatigued. Customers rate the difficulty of this repair as Medium.

This is an OEM Snapper and Simplicity part directly sourced from the manufacturer for use in lawn tractors. The push nut connects to the roller and is made of metal. During the installation process, a screwdriver might be needed to replace this part. Over time this item may break and will need to be replaced. This item is available as an individual replacement part.

This authentic manufacturer-supplied rounded roller is specially made for use with Snapper and Simplicity riding lawn mowers and garden tractors. It is a special component which helps to support the deck. This is an identical replacement for a missing or a damaged part that was installed on a new unit. Refer to the appropriate diagrams fo...Read morer your model to ensure the proper repair procedure. One durable component is included. Keep in mind the hardware to secure it is sold separately.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

Sold as a kit, including the metal body switch, a pair of keys, and the required hardware, this Ignition Switch Assembly has been sourced directly from the original manufacturer. If you are unable to start and stop your engine, you may need to replace the Ignition Switch Assembly. To complete this repair, you will need a screwdriver, a wrench set, and pliers. Customers rate this repair as Easy.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

Switch push button no/nc snap-in

Sourced directly from the original equipment manufacturer, this Spring Washer is used to spread the load under a bolt or nut. It has an I.D. of 0.475 inches, is made of metal, and is sold individually, not as part of a kit or assembly. If you notice any signs of corrosion, cupping, wear, or damage, you will need to replace the Spring Wa...Read moresher. Refer to your owner's manual to determine the exact location of this part on your model.