Models > 2661532211

2661532211 General Electric - Overview

Sections of the 2661532211

[Viewing 12 of 12]
Keep searches simple, eg. "belt" or "pump".
Drum Bearing Slide - White – Part Number: WE1M504
Drum Bearing Slide - White
★★★★★
★★★★★
(155)
PartSelect #: PS755842
Manufacturer #: WE1M504
This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for ...
$17.00
  In Stock
Drum Bearing Slide - Green – Part Number: WE1M1067
Drum Bearing Slide - Green
★★★★★
★★★★★
(27)
PartSelect #: PS6447706
Manufacturer #: WE1M1067
This original equipment manufacturer Drum Bearing Slide is a plastic, green, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if...
$11.49
  In Stock
BELT DRIVE – Part Number: WE03X29897
BELT DRIVE
★★★★★
★★★★★
(141)
PartSelect #: PS16542496
Manufacturer #: WE03X29897
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
$32.97
  In Stock
Door Latch – Part Number: WE1M1011
Door Latch
★★★★★
★★★★★
(14)
PartSelect #: PS3502777
Manufacturer #: WE1M1011
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
$12.87
  In Stock
Push-to-Start Switch – Part Number: WE4M416
Push-to-Start Switch
★★★★★
★★★★★
(23)
PartSelect #: PS3487190
Manufacturer #: WE4M416
This switch is used to activate the dryer.
$31.57
  In Stock
Interlock Switch – Part Number: WD21X10261
Interlock Switch
★★★★★
★★★★★
(17)
PartSelect #: PS1481922
Manufacturer #: WD21X10261
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
$23.70
  In Stock
Cycling Thermostat - 4 Wire – Part Number: WE4M181
Cycling Thermostat - 4 Wire
★★★★★
★★★★★
(8)
PartSelect #: PS267926
Manufacturer #: WE4M181
This thermostat helps to regulate the dryer's internal temperature. L210-30F
$58.38
  In Stock
Door Strike – Part Number: WE1X1192
Door Strike
★★★★★
★★★★★
(7)
PartSelect #: PS266893
Manufacturer #: WE1X1192
The door strike for your dryer is mounted on the dryer door. It fits into the door latch and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not on...
$8.63
  In Stock
Door Switch – Part Number: WE4M415
Door Switch
★★★★★
★★★★★
(5)
PartSelect #: PS2344321
Manufacturer #: WE4M415
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
$28.72
  In Stock
TOP BEARING ASSEMBLY 27 Inch – Part Number: WE03X27679
TOP BEARING ASSEMBLY 27 Inch
PartSelect #: PS12703118
Manufacturer #: WE03X27679
Note: The drum slides should also be replaced when your replacing the drum bearing. Slides are NOT included. This part helps your dryer operate as quietly as possible.
$24.52
  In Stock
High Limit Thermostat - L315-65 – Part Number: WE4M137
High Limit Thermostat - L315-65
★★★★★
★★★★★
(6)
PartSelect #: PS267900
Manufacturer #: WE4M137
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
$86.48
  In Stock
Lid Lock & Switch Assembly – Part Number: WH44X10288
Lid Lock & Switch Assembly
★★★★★
★★★★★
(5)
PartSelect #: PS3496878
Manufacturer #: WH44X10288
The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a ...
$98.46
  In Stock

Questions And Answers for 2661532211

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Rosie
    December 30, 2019
    My washing machine will not spin or drain the water out of the machine. What part do you advise that i replace
    For model number 2661532211
    Hello Rosie and thank you for writing. Sometimes, socks and other small articles of clothing can get into the drain system and clog the pump hose or the pump itself. Remove the hoses from the pump and check for any obstructions. If that is all clear, then you might have a faulty lid switch PS1481922 or drain pump PS3501453 also check the drive belt PS1766009 for damage or being loose. We hope this helps. Please contact us anytime if you require further assistance.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:

      Common Symptoms of the 2661532211

      [Viewing 15 of 15]
      Noisy
      Fixed by
      these parts
      Show All
      Will not tumble
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Marks left on clothes
      Fixed by
      these parts
      Show All
      Door won’t close
      Fixed by
      these parts
      Show All
      No heat or not enough heat
      Fixed by
      these parts
      Show All
      Shuts off too soon
      Fixed by
      these parts
      Show All
      Takes too long to dry
      Fixed by
      these parts
      Show All
      Leaking
      Fixed by
      these parts
      Show All
      Too hot
      Fixed by
      these parts
      Show All
      Will not shut off
      Fixed by
      these parts
      Show All
      Door latch failure
      Fixed by
      these parts
      Show All
      Shakes and moves
      Fixed by
      these parts
      Show All
      Lid or door won’t close
      Fixed by
      these parts
      Show All
      Touchpad does not respond
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Drum belt broke
      Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on.
      This was a first attempt ever at fixing an appliance and it was no big deal.
      Parts Used:
      BELT DRIVE
      • Adrian from Middletown, MD
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      161 of 217 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dryer would get very hot and then turn off
      It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it was a Thermo-disc part so I tried the manufacture's website but I couldn't match the numbers on the back to their part numbers. I tried several other sites and your site was the cheapest. It was real easy to use the web site and diagrams to find the right schematic and part. I ordered it online and it was delivered in 2 days with the regular shipping. When he first put it in the dyer didn't turn on. He found no power coming out of the timer so he cleaned the contacts and it worked. Thanks for making the ordering so easy.
      Parts Used:
      Cycling Thermostat - 4 Wire
      • David from Auburn, MA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Screw drivers
      268 of 552 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dryer would not start
      The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a power fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.
      Parts Used:
      Door Switch
      • Joshua from Dallas, TX
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Pliers, Screw drivers, Socket set
      80 of 116 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!