Models > 2661532110

2661532110 Kenmore Washer Dryer Combo - Overview

Sections of the 2661532110

[Viewing 12 of 12]
Keep searches simple, eg. "belt" or "pump".
Drum Bearing Slide - White – Part Number: WE1M504
Drum Bearing Slide - White
★★★★★
★★★★★
(155)
PartSelect #: PS755842
Manufacturer #: WE1M504
This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for ...
$17.00
  In Stock
Drum Bearing Slide - Green – Part Number: WE1M1067
Drum Bearing Slide - Green
★★★★★
★★★★★
(27)
PartSelect #: PS6447706
Manufacturer #: WE1M1067
This original equipment manufacturer Drum Bearing Slide is a plastic, green, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if...
$11.49
  In Stock
BELT DRIVE – Part Number: WE03X29897
BELT DRIVE
★★★★★
★★★★★
(141)
PartSelect #: PS16542496
Manufacturer #: WE03X29897
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
$32.97
  In Stock
Rear Drum Bearing Kit – Part Number: WE25M40
Rear Drum Bearing Kit
★★★★★
★★★★★
(17)
PartSelect #: PS267529
Manufacturer #: WE25M40
This rear drum bearing kit includes a shaft, ground strap, bearing, seven screws, and installation instructions. The bearing plate comes with a slot in it for the ground strap. This part helps keep yo...
$67.72
  In Stock
Door Latch – Part Number: WE1M1011
Door Latch
★★★★★
★★★★★
(14)
PartSelect #: PS3502777
Manufacturer #: WE1M1011
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
$12.87
  In Stock
Push-to-Start Switch – Part Number: WE4M416
Push-to-Start Switch
★★★★★
★★★★★
(23)
PartSelect #: PS3487190
Manufacturer #: WE4M416
This switch is used to activate the dryer.
$31.57
  In Stock
Interlock Switch – Part Number: WD21X10261
Interlock Switch
★★★★★
★★★★★
(17)
PartSelect #: PS1481922
Manufacturer #: WD21X10261
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
$23.70
  In Stock
Cycling Thermostat - 4 Wire – Part Number: WE4M181
Cycling Thermostat - 4 Wire
★★★★★
★★★★★
(8)
PartSelect #: PS267926
Manufacturer #: WE4M181
This thermostat helps to regulate the dryer's internal temperature. L210-30F
$58.38
  In Stock
Lid Switch with Wire Harness – Part Number: WH12X10334
Lid Switch with Wire Harness
★★★★★
★★★★★
(18)
PartSelect #: PS1482372
Manufacturer #: WH12X10334
This lid switch with wire harnesses is used in washing machines. The pin on the lid switch pushes onto the lever of the switch to communicate to the machine that the washer lid is closed. If your wash...
$47.77
  In Stock
Door Strike – Part Number: WE1X1192
Door Strike
★★★★★
★★★★★
(7)
PartSelect #: PS266893
Manufacturer #: WE1X1192
The door strike for your dryer is mounted on the dryer door. It fits into the door latch and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not on...
$8.63
  In Stock
Door Switch – Part Number: WE4M415
Door Switch
★★★★★
★★★★★
(5)
PartSelect #: PS2344321
Manufacturer #: WE4M415
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
$28.72
  In Stock
TOP BEARING ASSEMBLY 27 Inch – Part Number: WE03X27679
TOP BEARING ASSEMBLY 27 Inch
PartSelect #: PS12703118
Manufacturer #: WE03X27679
Note: The drum slides should also be replaced when your replacing the drum bearing. Slides are NOT included. This part helps your dryer operate as quietly as possible.
$24.52
  In Stock

Questions And Answers for 2661532110

Be the first to ask our experts a question about this model!

Common Symptoms of the 2661532110

[Viewing 18 of 18]
Noisy
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Will not tumble
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
No heat or not enough heat
Fixed by
these parts
Show All
Pumps but will not spin
Fixed by
these parts
Show All
Shuts off too soon
Fixed by
these parts
Show All
Takes too long to dry
Fixed by
these parts
Show All
Will not agitate
Fixed by
these parts
Show All
Leaking
Fixed by
these parts
Show All
Too hot
Fixed by
these parts
Show All
Will not shut off
Fixed by
these parts
Show All
Door latch failure
Fixed by
these parts
Show All
Shakes and moves
Fixed by
these parts
Show All
Lid or door won’t close
Fixed by
these parts
Show All
Touchpad does not respond
Fixed by
these parts
Show All
Will not drain
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
washing machine would not go through all cycles or agitate
After removing frt panel which prys off I checked for anything obvious like a loose belt. Then I jiggled the magnet switch located on the inside of the loading cover. I saw the machine start agitating the it stopped again when I stopped touching it. I ordered the new part and spliced it in with the wire crip tool. Now the machine is A ok.
Parts Used:
Lid Switch with Wire Harness
  • Brian from Millerplace, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
220 of 272 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum belt broke
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on.
This was a first attempt ever at fixing an appliance and it was no big deal.
Parts Used:
BELT DRIVE
  • Adrian from Middletown, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
162 of 218 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would get very hot and then turn off
It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it was a Thermo-disc part so I tried the manufacture's website but I couldn't match the numbers on the back to their part numbers. I tried several other sites and your site was the cheapest. It was real easy to use the web site and diagrams to find the right schematic and part. I ordered it online and it was delivered in 2 days with the regular shipping. When he first put it in the dyer didn't turn on. He found no power coming out of the timer so he cleaned the contacts and it worked. Thanks for making the ordering so easy.
Parts Used:
Cycling Thermostat - 4 Wire
  • David from Auburn, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
268 of 552 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!