2658-059 (F72B) Milwaukee Impact Driver - Parts

This is an authentic Milwaukee replacement part that has been sourced from the original manufacturer to be used with hammer drivers, drills, and impact wrenches. The lead wires are used to carry electricity from the switch to the brush card assembly. This item is available as an individual replacement part.

This is an authentic manufacturer-supplied replacement field. It is specially designed for use with Milwaukee impact drivers. In conjunction with an armature, it is the central component of an electric motor. A field is usually damaged by overloading the power tool, or because of a bad armature. It is highly recommended to replace both ca...Read morerbon brushes when replacing a field. This high-quality item is sold individually. To complete this repair you would need a screwdriver. Make sure to refer to the appropriate diagrams for your model for the correct replacement procedure.

It is a genuine OEM sourced replacement screw that is commonly utilized on Milwaukee power tools. This screw is a standard hardware which will have multiple applications depending on the model of your too, please make sure to check appropriate diagrams for correct location and use of this item. This is a high-quality Torx screw that is made of durable metal and it is sold individually.

This is an authentic Milwaukee replacement part manufactured for use with power tools. The special compression spring is used with a variety of different types of power tools. This spring is commonly used to allow flexibility between part assemblies and to prevent jarring between the part assemblies. This compression spring is sold as an ...Read moreindividual replacement part, please see model diagram for part location and usage.

This is a genuine Milwaukee replacement part, it is sold individually. The Milwaukee Belt Hook is attached to the bottom of the handle assembly on the tool model numbers shown below. Its purpose is to hook the tool to your belt when not using the tool. The Belt Kit includes the screw to attach it to the housing of the tool.

It is a high quality OEM sourced hardware that is specially designed for use with Milwaukee impact wrenches. This screw is generally used to secure the belt clip assembly which is sold separately. Please note one durable pan head screw is included per order.

This replacement armature assembly is an authentic item that is specially manufactured for Milwaukee power tools. It is a center component of an electric motor, armatures fail most often from heat and stress when the tool is overloaded. It is a complete assembly which includes the armature, the plastic fan, the armature bearing and the co...Read moremmutator end bearing. It is highly recommended to replace both carbon brushes when replacing an armature. Please note this high-quality component is sold individually.

Genuine manufacturer approved replacement part designed for use with Milwaukee impact wrenches. This assembly holds carbon brushes around the armature to provide stable and safe contact. This assembly consists of: plastic holder ring, four (4) metal brush holders with springs and four (4) carbon brushes with lead wires attached. It also i...Read morencludes two (2) screws and two (2) washes used to secure the brush card. To replace this assembly you would need a screwdriver. • First remove screws holding the cover together • Carefully separate housing to gain access to armature and brush holder • Disconnect the wires • Remove the screws holding brush card assembly • Remove old brush holder and install the new assembly • Reassemble and test your tool

It is an authentic OEM sourced replacement carrying case that is specially designed to carry Milwaukee impact wrenches. The layout of the case will allow the tool to stay secured in place and protect it from outside damage. This part is made from durable high quality plastic and it is sold individually.