2602-22DC (C15B) Milwaukee Cordless Drill - Overview

This is a genuine Milwaukee replacement part, it is sold individually. The Milwaukee 14-46-2012 Brush Card Assembly uses four brushes, whereas most power tools use two brushes. To replace this part you will need to release the spring tension on the brush then place the brush card in its proper position. Worn brushes frequently are the...Read more cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is a genuine manufacturer-supplied part that is made for use with Milwaukee hammer drills. It is a special screw that is utilized to secure the chuck. Commonly, screws may need to be replaced due to worth threads or a head socket. It provides an identical replacement for a missing or a faulty hardware that was included with a new uni...Read moret. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. It is a left hand thread screw. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is a genuine Milwaukee part. It is sold individually. It attaches to the bottom of the housing on a Milwaukee cordless drill. Its purpose is to hold the small screwdriver bits that are inserted into magnetic bit holders. It is compatible with the Milwaukee tools shown below.

This is an Original OEM replacement Armature Assembly designed for use with Milwaukee Compact Hammer-Drills. This item includes an Armature, Fan, Armature Bearing and Commutator End Bearing. Due to constant contact with Carbon Brushes armature will eventually wear out and would need to be replaced. It is highly recommended to replace bo...Read moreth Carbon Brushes when replacing an armature. Remember to be especially careful of the armature fan when you remove it, because if you break it, you will have to replace the entire armature. To replace this Armature you would need a Torx T10 Screwdriver to remove the Case.

This replacement end cap is a genuine manufacturer sourced part that is specially designed for use with Milwaukee compact hammer-drills. It is the end cap to which the hose is connected. This cap is made from durable, high-quality metal and it is sold individually.

This is a genuine manufacturer-approved replacement component which is specially designed for use with Milwaukee power tools. It is the side handle that provides a user with a comfortable grip for operating the unit. It is made of high-quality rubber with metal and is sold individually.

This is an authentic Milwaukee part, sold individually. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem. The chuck is the top portion of the drill that holds the different drill bits. It is compatible with the hammer drills listed below. In orde...Read morer to install this chuck you will need to thread the chuck assembly onto the spindle then secure the chuck assembly as tightly as possible (by hand). Then open the chuck to accept the retaining screw and install the retaining screw. Secure the screw with a Phillips screwdriver. The screw is reverse threaded requiring counter clockwise rotation to secure.

This is a genuine Milwaukee replacement part, it is sold individually. The Milwaukee Belt Hook is attached to the bottom of the handle assembly on the tool model numbers shown below. Its purpose is to hook the tool to your belt when not using the tool. The Belt Kit includes the screw to attach it to the housing of the tool.