25B-52J1700 (2015) Yard Machines Edger - Overview

This Edger Blade is a black, metal blade which is sold individually and comes certified from the manufacturer. Installation is rated as "Easy" and requires a socket set and wrench set. This blade attaches to the drive shaft and is used for edging the grass around driveways and walkways. If this part becomes worn/fatigued/damaged (which ma...Read morey happen after hitting the pavement) you will notice an odd vibration and poor trimming, at which time the part should be replaced.

The Belt Guard is used to protect you from harm against the rotating belt and shaft. This metal part is rated as "Easy" to install and requires a socket set, and wrench set. It attaches to the spindle plate assembly. If there is visible damage, the part should be replaced.

A torsion spring is a grey, metal spring which comes individually sold. It provides tension on triggers and switches and has other applications depending on the equipment. If broken, there will be no tension and the part should be replaced. Installation is rated as Medium difficulty and requires a wrench and socket set.

This is a genuine replacement part sourced directly from the manufacturer. The blade is found on Craftsman edgers. This part is made of metal, and is used to cut through turf to create a clean edge for lawns and flower beds. You will require a wrench when replacing this part. This item is sold individually.

This is a type of handle with a knob-shaped grip used in a variety of lawn and garden tools with adjustable features. This genuine OEM part is 0.8 x 0.2 x 1 inches and is made from plastic. It is designed to connect and disconnect individual parts together without using any tools. By loosening the knob, you can easily adjust the height of...Read more the handles on your equipment to your liking as well as fold the handles for proper storage. Over time the handle knob can wear down or break. If this happens, you will need to unscrew the knob and remove the old rope guide before you can place the new knob on. Place the new rope guide in position, thread the eye of the cable through the eye hook loop and finally thread the new knob on to the shaft and turn it clockwise with your hands until it is secure.

It is an authentic OEM part which is made for use with lawn and garden equipment. This is the special self-tap screw that helps to secure components together. If the hardware is missing or is damaged, this will provide an identical replacement for the original hardware that was installed on a new unit. This high-quality screw is made of d...Read moreurable metal and is sold as an individual item. Refer to the owner\\\'s manual and the appropriate diagrams for your model to ensure the proper replacement procedure. A wrench will be needed to secure and remove this hex washer head self-tap screw.

This is an original replacement part manufactured for use with walk-behind lawnmowers. The metal rope guide mounts to the side rail of the handle, and is secured by a handle knob. The rope guide keeps the starter rope on the upper handle for ease of access, and to keep the rope out of the way while operating. The rope guide is sold individually.

The Push Cap Rod is a 1/2-inch metal metal cap which can be easily installed with a hammer and pliers. This manufacturer certified part comes in silver and is made of metal. This cap attaches onto an axle to help the wheel stay attached. If broken, the wheel will fall off and the part should be replaced.

This is a replacement part directly sourced from the manufacturer for use in lawn mowers and trimmers made by Bolens, MTD, Yard Man, and Yard Machines. The front wheel is made of hard plastic and attaches to the front axle assembly. A screwdriver, socket set, and a wrench set might be needed during the installation process. It may become ...Read morebroken and will need to be replaced. This is available as an individual replacement part.

This is an OEM part sourced directly from the manufacturer. The rear wheel is designed for use in lawn mowers from MTD, Bolens, Yard Man, and Yard Machines. This part is made of high-quality plastic and rubber, and is placed on the back of the mower deck to allow it to move easily. You will require a wrench when replacing this part. This item is sold individually.