2595 (Type 2) Weed Eater Leaf Blower / Vacuum - Overview

This is a vacuum bag made for blowers and vacuums and is attached to the vacuum to collect whatever material is sucked into the equipment. Measuring approximately 31-inches long and 21-inches wide, this bag unzips to easily empty the contents. Over time the vacuum bag can become overly clogged and dirty, or damaged by its contents, and wh...Read moreen this happens, it is best to replace it. This is a genuine OEM part and is sold as an individual part. Ordering spare vacuum bags can ensure you always have one on hand when an unexpected item damages your vacuum bag during regular use.

This wire harness/switch kit is a genuine OEM replacement kit used with various electric leaf blowers. It includes the control switch, connector plug, terminals, and electrical wires. The control switch allows you to operate the equipment. The connector is responsible for joining the wires within the harness. The terminals connect the wir...Read morees to the switch, and the wires carry the electrical current. If any of the components in this assembly are faulty, you will likely experience issues with starting and running the leaf blower, or total equipment failure. To access the wire harness, remove the fasteners that secure the blower housing and pull the housing off. Carefully disconnect the wire harness and dispose of it appropriately. Place the new harness in position and connect the wires to the appropriate terminals. Ensure that the new harness is securely fastened before you begin operating the leaf blower.

This is a genuine part which is supplied directly from the original equipment manufacturer and is used with Craftsman leaf blowers. The vacuum tube directs leaves and debris into the vacuum bag. This part is made of hard plastic and is sold individually. There are no tools required for installation, simply attach the two pieces together and adhere that to the housing.

This is an authentic item that is supplied by the original manufacturer for use with handheld electric blowers. It fits into the air inlet to enhance the blower function. This is an identical replacement for a missing or a damaged component that was included with a new unit. Check the owner's manual for the correct application of this par...Read moret. Keep in mind this high-quality inlet restrictor is made of durable plastic and is sold individually.

This is a genuine replacement part manufactured for use with electric blowers. The plastic nozzle fits at the bottom of the blower tube and is used to focus the are discharged by the blower. This nozzle is available as an individual replacement part.