253R (2011-08) Husqvarna Brush Cutter - Overview

This 25mm blade nut is a fastener that secures the blade to the spindle or shaft of your lawn equipment. It is located at the center of the blade. Signs of a broken blade nut include looseness, stripping, cracks, or excessive wear. Failing to replace a broken blade nut can result in a loose or dislodged blade during operation. To unthread...Read more the blade nut on your machine, use a wrench or socket to loosen it. This OEM component is sold individually. To ensure you have the correct number of blade nuts for your machine, refer to the user guide as your equipment may require multiple blade nuts. Consider replacing all of the nuts in one go as they wear out at similar rates.

This manufacturer-grade bevel gear grease is used to grease transmissions, bevel gears and other gear case assemblies.

It is an authentic OEM sourced hardware that is commonly utilized on Husqvarna handheld trimmers and blowers. This screw has multiple applications depending on unit, to ensure correct use of this hardware please make sure to check appropriate diagrams. Please note this hex socket head screw is sold individually.

This is a genuine manufacturer-sourced replacement part which is specially designed for use with Husqvarna lawn and garden equipment. It is an identical replacement for a missing or damaged hexagon nut that was installed on a new unit. This is a standard hardware which has multiple applications, please make sure to refer to the appropriat...Read moree diagrams of your model for the correct location and application of this component. Keep in mind this high-quality nut is made of durable metal and is sold individually.

This stop button is a safety feature used in various types of lawn and garden equipment. It is a genuine OEM replacement part which is responsible for quickly shutting off the engine in case of an emergency or when it is no longer in use. The stop button is fitted into the handle controls for easy access. If the stop button becomes damage...Read mored or dislodged from its position, you will not be able to stop the equipment in an emergency. Therefore, it is important to replace the faulty stop button promptly to ensure that this emergency measure remains available, and avoid injury to the operator. Before beginning the repair, ensure that the equipment is turned off. Disconnect the stop button wires and detach the old stop button from the handle controls. Plug the new stop button in in place and reconnect the wires. If your equipment has fasteners with hex sockets, you will need to use a hex key/Allen wrench to remove and install the stop button. Ensure that the button is fitted securely before attempting to use your equipment again.

This genuine OEM sourced replacement snap ring is specially produced for use with Husqvarna brushcutters and backpack blowers. It is utilized to secure the piston pin, please make sure to check appropriate diagram of your model for correct location and use of this hardware. To remove this snap ring it is advised to use snap-ring pliers. N...Read moreote this is a high-quality component which is made of durable metal and it is sold individually.

This is an authentic Husqvarna replacement part. The throttle control is found in yard tools from Husqvarna such as brush cutters and trimmers. This part is made of high-quality plastic, and includes the throttle trigger and the throttle lock. As a safety feature, both parts must be engaged in order to trigger the throttle in the machine. You may require an Allen or hex wrench when replacing this item.

This authentic OEM part is specially made for use with Husqvarna and Jonsered handheld lawn and garden equipment. It helps to provide a tight fit between connected components of the carburetor. This is a high-quality replacement for a missing or a damaged diaphragm that was installed on a new unit. Refer to the diagrams for your model to ...Read moreensure the proper replacement procedure. A wrench set will be needed to perform this repair. Keep in mind this diaphragm is made of durable material and is sold individually.

This is an OEM part sourced directly from the manufacturer. The piston pin is commonly found in Husqvarna backpack blowers. This part is made of metal, and is used to hold the connecting rod in the piston. You will require pliers when replacing this item. The piston pin is available as an individual replacement part.