A level crisper cover relies on secure supports beneath its frame. This plastic front crisper cover support mounts to the inner refrigerator cabinet wall and holds up the shelf above the produce drawers. A cracked or broken support may allow the cover to drop or tilt, making the drawers difficult to open and close. Replacing a damaged stu...Read mored helps restore stable shelf support when the cover frame and cabinet attachment area remain intact. Damage to those surrounding parts can also cause sagging or uneven drawer movement. This is an OEM part sourced directly from the manufacturer.
The crisper drawer cover rests on this support, which mounts inside the refrigerator cabinet wall. This is an OEM replacement part. Confirm it fits your refrigerator model before ordering.
This OEM cup filter is designed to be compatible with all rear-filter refrigerators made before April 2001. The filter fits into a round white plastic housing. For this repair you may also require the PS428513 wrench or PS428532 O-ring. To install you will need to unscrew the cup before you can see the old filter, and then dump the water....Read more Pull the old filter straight down and place the new filter inside the filter cup. The end of the filter with the O-ring should be directed upward. As you tighten the filter it will align itself. If your refrigerator has a Change Filter light, it will need to be reset. Press and hold this button until the green light flashes (up to 15 seconds). This filter has a 2-Inch depth, 4.25-Inch height, 2-Inch width and needs to be replaced every 6 months of use or 200 gallons depending on which comes first. Filters for: Taste and odor Sediment 99.3% of Lead 99.99% of Cysts 99.7% of Turbidity 99.8% of Particulates (Class I) 94.9% of Atrazine (a herbicide) 94.2% of 2,4-D (a herbicide) 97.8% of Chlorine (Class I) 87.5% of Toxaphene (a pesticide).
This refrigerator water inlet valve assembly controls water flow to the ice maker and door dispenser. Its three electric coils open and close separate water paths, sending water where it is needed. A leaking or blocked valve may cause weak dispenser flow, small ice cubes, slow ice production, or water pooling behind the refrigerator. Repl...Read moreacing a faulty assembly helps restore steady water flow and stops unwanted filling between uses. Unplug the refrigerator and shut off the water supply before replacing the valve. This is an OEM part sourced directly from the manufacturer.
This door closing cam works with the lower hinge mechanism to help the refrigerator or freezer door move into its closed position. It is located at the bottom of the door and is sold individually. A worn or damaged cam may cause clicking during movement or prevent the door from closing smoothly. Inspect the cam and surrounding hinge parts...Read more if the door sags or closes unevenly, since other faults can cause similar symptoms. Match the cam to the appliance parts diagram and follow the door support instructions before removing hinge hardware. This is an OEM part sourced directly from the manufacturer.
This defrost thermostat monitors evaporator temperature and switches the heater off as the coil warms during defrost. The kit includes the thermostat, mounting clip, wire leads, and a heat shrink sleeve. A faulty thermostat may prevent proper defrosting, allowing frost to build up and restrict cooling airflow. Check the defrost system bef...Read moreore replacement, since heater and control faults can cause similar symptoms. The thermostat is located behind the rear freezer panel. Disconnect power before accessing it and follow the kit instructions for mounting and sealing the wire connections. This is an OEM part sourced directly from the manufacturer.
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the l...Read moreimit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.
The crisper drawer cover uses this glass insert to help retain moisture and protect produce. It fits into the cover frame and is an OEM part. Confirm fit against your refrigerator model before ordering, and wear work gloves during installation.
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If the existing bulb is broken in the socket, disconnect the power to the refrigerator and use a pair of needle nose pliers to grip the intern...Read moreal fragments of the bulb to unscrew. Replace with the new bulb and reconnect the power to the refrigerator. These bulbs are sold individually and are a commonly replaced part; consider ordering a spare.
Support for the deli drawer and glass shelf comes from this white plastic refrigerator meat pan cover frame. It holds the glass insert above the drawer and provides support for the pan beneath it. Cracks, broken edges, or damaged drawer supports may cause sagging, tilting, or difficulty opening and closing the pan. Replacing a damaged fra...Read moreme helps restore stable storage and smoother drawer access. The glass insert and drawer are not included, allowing intact existing pieces to be reused with the replacement frame. This is an OEM part sourced directly from the manufacturer.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
water leaking out of refrigerator
608 of 723 peoplefound this instruction helpful.
Jose from Alexandria, VA
Easy
15 - 30 mins
Nutdriver, Pliers, Wrench (Adjustable)
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the
... Read more valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Read less
Was this helpful?
Thank you for voting!
Water in Frig was tasting bad.
499 of 504 peoplefound this instruction helpful.
Patricia from Fulton, MO
Really Easy
Less than 15 mins
I turned the cap for the old filter and pulled it out . Then I put in the new one in and turned the cap to secure it in frig.
Was this helpful?
Thank you for voting!
water from refigerator dispenser started tasting bad
369 of 370 peoplefound this instruction helpful.
Anthony from Springfield, VA
Easy
Less than 15 mins
I removed the top shelf in the fridge. I then unscrewed the cover to the water filter and pulled the filter cartridge down into the cover. Keep the cover upright as there may be some water in it. I carried it to the sink. I took the new cartridge and ran water through it from the sink, then set it in the cover and took it to the fridg
... Read moree. I pushed the cartridge up into the space that I removed the old one from and screwed the cover back on. Then I took an empty pitcher and filled it from the water dispenser in the fridge door. I did this three times to charge the filter and remove charcoal dust. Water tastes great now. I ordered two filters so I would ony have to buy once a year. Great site to order the filters from. Cheaper than other sources and delivery was quick.