24AA550C000 (2000) Yard Machines Log Splitter - Overview

This Washer-Lock 5/16 is a silver metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter it is used to prevent the nut from backing off and becoming loose on the pulley shaft and is attached to the drive belt pulley assembly. You will know if you need t...Read morehis because your owners manual will specify it or the model number of your machine will correspond with this part. If the part is broken due to fatigue the shafts will free spin when they should be locked together and must be replaced.

The Adjustable Gib (Keyway) is a gray metal 2 inch individually sold part rated as easy to install by consumers. It locks two shafts together so they can rotate. You will know if you need to replace this part if the shaft is freely spinning and will not spin with the drive shaft. You can see this happening when the shaft is turning or you...Read more can turn the shaft by hand to see if the two parts connect. The part is attached between the two shafts.

The Push Cap is a black plastic cap which secures to the end of a shaft to prevent injury. It can be installed with a hammer and is rated as "Easy" to install. If the part appears damaged or worn down in a way that could cause injury, it should be replaced. Refer to your make, model and diagrams to check if this is the right part for you.

This OEM Hub Cap, or Dust Cap, is a 2-inch, silver, steel part, sold individually. It requires a Rubber Mallet to install and its installation is rated as Easy by our customers. This part attaches inside the wheel on the hub, and is used to keep dirt out of the hub. It must be replaced when damaged or missing (if it is damaged it will b...Read moree out of round, and will not fit). Check your model number to ensure you are purchasing the correct part.

This OEM replacement washer is often used on several different types of lawn and garden equipment but can also be used on compatible home appliances. It is made of metal meaning it is vulnerable to corrosion and will produce more noise from your lawn equipment or appliance if it has broken. Its main purpose is to reduce rattling and noise...Read more or to better secure and evenly distribute pressure between two different parts. This washer has a .38-inch inner diameter .87-inch outer diameter and .09-inch thickness and is sold individually.

This hex bolt is a genuine OEM fastener used in various lawn and garden equipment and machinery. It has a hexagonal shaped head, with a diameter of 3/8 inches. The bolt shaft is 1.5 inches long with 24 threads per inch. The hexagon shape makes the bolt easier to grip and tighten using a wrench or a set of pliers. Over time, it is normal f...Read moreor the bolt to crack, corrode, or for the shaft threads to wear down. Inspect all the bolts on your equipment and replace all those that show visible signs of wear. Use a socket wrench to remove the faulty bolt(s) and thread the new one into position. Each bolt is sold individually. Secure it with a wrench or pliers and be careful not to over tighten as this could damage the bolt and equipment.

This is a genuine replacement part sourced from the original manufacturer for use with log splitters. The metal hex cap screw is commonly used to secure the wedge assembly to the beam assembly. The hex cap screw is sold as an individual replacement part, please note six screws may be required.

This is an original replacement part manufactured for use with lawn and garden equipment. This metal cotter pin can have different applications depending upon the model of equipment. The versatile cotter-pin is sold individually, please see model diagram for part location, and usage.