24765X8A Murray Lawn Tractor Accessories - Overview

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

This 5/16-inch?18 wing nut secures a removable or adjustable part on select lawn and garden equipment. Its winged shape allows it to be tightened and removed by hand. Use the full equipment model number to guarantee the proper fit and location. Check the stud and washer for damaged threads or wear before installation. Start the nut by hand and tighten it firmly, but do not use pliers or overtighten it.

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicity. It is made out of metal and is sold individually. During the installation process, a wrench set might be needed to replace this part. Over time this part may break and will need to be replaced.

This is a genuine OEM replacement part used on lawn tractors and grass baggers/catchers. This rubber strap measures 4" long. It connects onto the chute (part # 690367MA), attached by a screw with nut. One strap is included. Commonly purchased with: • Part # 01X139MA, Screw • Part # 015X89MA, Nut

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal nut is used to fasten the bolt that secures the pivot bracket to the seat deck assembly. This nut is available as an individual replacement part.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with lawn tractors, snowthrowers, utility carts, and grass baggers. The special nut is used with different types of machines and the application of the nut can vary based on the model of the equipment. This nut is available as an individual replacement part.

Handle connect tube