24743X50A Murray Lawn Tractor Accessories - Overview

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

This high quality OEM supplied replacement part is used on Murray lawn mowers. It is generally used to secure the mulch cover. This part durable metal windnut is sold individually, please note the bolt and washer to helps securing the cover are all sold separately.

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicity. It is made out of metal and is sold individually. During the installation process, a wrench set might be needed to replace this part. Over time this part may break and will need to be replaced.

This replacement blade is a high-quality component which is sourced directly from the original equipment manufacturer for use with Murray riding lawn mowers and garden tractors. It is a high-lift blade with larger wind wings which increase airflow and aid in bagging grass clippings, especially on riding mowers with long discharge tubes. O...Read morever time blades tend to wear out and may get damaged eventually requiring replacement to maintain a clean cut lawn. This part is made of high-quality metal and it is sold individually.

This is a genuine OEM replacement part used on lawn tractors and grass baggers/catchers. This rubber strap measures 4" long. It connects onto the chute (part # 690367MA), attached by a screw with nut. One strap is included. Commonly purchased with: • Part # 01X139MA, Screw • Part # 015X89MA, Nut

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal nut is used to fasten the bolt that secures the pivot bracket to the seat deck assembly. This nut is available as an individual replacement part.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with lawn tractors, snowthrowers, utility carts, and grass baggers. The special nut is used with different types of machines and the application of the nut can vary based on the model of the equipment. This nut is available as an individual replacement part.

This is an original replacement part sourced directly from the manufacturer. The connector tube is found in Murray grass baggers. This part is made of high-quality plastic, and is used to join tubes together. You will require a wrench when replacing this product. This item is sold as an individual replacement part.