Models
>
247-203B105
247-203B105 (1997) MTD Chipper Shredder - Overview
Sections of the 247-203B105
[Viewing 9 of 9]_WW_1.gif "Page A Diagram and Parts List for 1997 MTD Chipper Shredder")
_WW_2.gif "Page B Diagram and Parts List for 1997 MTD Chipper Shredder")
_WW_3.gif "Page C Diagram and Parts List for 1997 MTD Chipper Shredder")
_WW_4.gif "Page D Diagram and Parts List for 1997 MTD Chipper Shredder")
_WW_5.gif "Page E Diagram and Parts List for 1997 MTD Chipper Shredder")
_WW_6.gif "Page F Diagram and Parts List for 1997 MTD Chipper Shredder")
_WW_7.gif "Page G Diagram and Parts List for 1997 MTD Chipper Shredder")
_WW_8.gif "Page H Diagram and Parts List for 1997 MTD Chipper Shredder")
_WW_9.gif "Page I Diagram and Parts List for 1997 MTD Chipper Shredder")
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Ground Drive Belt
PartSelect #: PS9172714
Manufacturer #: 954-04032B
3/8 x 36-1/8-inch
This ground drive belt (part number 954-04032B) is for lawn mowers.
Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels.
Wear work glov...
$27.39
In Stock
Chipper Blade
PartSelect #: PS9462700
Manufacturer #: 981-0490
The Chipper blade attaches to the impeller and is used for cutting. Installation is rated as "Easy" and requires pliers, a socket set, wrench set, and allen wrench set. A dull blade must be sharpened ...
No Longer Available
Fl. Bearing
PartSelect #: PS9302372
Manufacturer #: 741-0487C
Made of durable silver plastic, this Flange Bearing is an authentic manufacturer-source replacement part for hundreds of models of lawn and garden equipment. It is used to allow a shaft to connect whi...
$7.51
In Stock
Blade-Flail
PartSelect #: PS9096396
Manufacturer #: 719-0329
This manufacturer certified flail blade is a metal blade used to shred or cut lawn and garden debris. If the blade becomes dull it should be sharpened or replaced, depending on the extent of the damag...
$32.78
In Stock
Bell. Wash. .340 I.D. x .872 O.D.
PartSelect #: PS10006541
Manufacturer #: 736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between variou...
$4.99
In Stock
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.99
In Stock
Push Cap
PartSelect #: PS9300605
Manufacturer #: 726-0214
The Push Cap is a black plastic cap which secures to the end of a shaft to prevent injury. It can be installed with a hammer and is rated as "Easy" to install. If the part appears damaged or worn down...
$9.96
In Stock
Questions And Answers for 247-203B105
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Parts Used:
-
LISA M from BATESVILLE, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!