24688W0 General Electric Range - Parts

At the floor of your electric oven is the bake element. This partially open-style element comes with push-on terminals. The bake element will likely provide most of the heat for baking. Therefore, if the oven is not heating properly, or if food is burnt on top and undercooked below, your bake element may be at fault. If you can see that t...Read morehe element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, use a multi-meter to test for electrical continuity to see if the element needs replacing.

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

Sold individually. This part accepts a double-flat shaft.

Please note: With this control the wiring could be differ from the original. It will possibly need to be installed by an appliance repair person.