246-633-190 (1996) MTD Lawn Tractor Accessories - Overview

This hex bolt is a genuine OEM fastener used in various lawn and garden equipment and machinery. It has a hexagonal shaped head, with a diameter of 3/8 inches. The bolt shaft is 1.5 inches long with 24 threads per inch. The hexagon shape makes the bolt easier to grip and tighten using a wrench or a set of pliers. Over time, it is normal f...Read moreor the bolt to crack, corrode, or for the shaft threads to wear down. Inspect all the bolts on your equipment and replace all those that show visible signs of wear. Use a socket wrench to remove the faulty bolt(s) and thread the new one into position. Each bolt is sold individually. Secure it with a wrench or pliers and be careful not to over tighten as this could damage the bolt and equipment.

This Cotter Pin is a silver 5/32x1-1/4 metal part, sold individually and certified by the original equipment manufacturer. It connects to the axel shaft after the wheel and washer have been installed but before the hub cap. It is used to prevent the wheel from falling off, and if it breaks (due to fatigue) the wheel will fall off. Check...Read more your model number for the correct size of replacement cotter pin to know you are ordering the correct model. This is a one-time use product, which should be replaced during any other repair in which it is disturbed or dislodged.

This control valve, also known as the hydraulic control valve, is designed for use in log splitters. It is sourced from the original equipment manufacturer and allows you to control the movement of the wedge/ram that splits the logs. It also allows you to switch the hydraulic system on/off and adjust the speed and direction of the hydraul...Read moreic cylinder. Over time the valve may become stuck from a buildup of debris and rust, or its handle may malfunction, rendering it unusable. To replace the valve, first disconnect all connections to the old valve. It is common to notice fluid leaking during this repair, simply top it back up once you are done. Place the new control valve in position and secure it with the appropriate screws or fasteners.

This OEM Cone Bearing, also known as a Tapered Bearing, is a silver, .75 I.D., metal part. Sold individually, it attaches inside the wheel hub, and customers have rated the installation as Medium Difficulty. It is recommended to pack the bearing before installation. This part reduces friction on a moving part, inside of a stationary par...Read moret. When it breaks, you will hear a grinding, growling or squealing sound. It must be replaced when worn or damaged (such as if there are scores on the rollers or on the mandrel).

It is an authentic OEM replacement part that is specially designed for use with lawn and garden equipment. This oil filter helps to remove harmful contaminants from engine oil. It maintains the optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace it at least once a season. Please note this high-quality oil filter is sold individually.