243-603-100 (1983) Cub Cadet Edger - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

Designed for use with lawn and garden equipment, this manufacturer-approved component is an identical replacement for an idler in a variety of models. This part is not part of a kit or assembly. It is sold individually. The idler is made of metal, is white in color, roughly 2.75 inches in diameter, and is used to drive the unit as well as...Read more support the belt. This part needs to be replaced when it is worn or damaged, which will occur through regular use. When the part is malfunctioning, you will lose drive control in your machine. This part is located usually located on the idler arm. Please refer to your owner's manual for the exact location on your model. You will need a wrench set or socket set to complete this repair. Customers rated this repair as medium difficulty.

This is a genuine OEM sourced replacement part that is intended to be used with edgers from MTD, Cub Cadet, Yard Machines, Troy-Bilt, and Yard-Man. The v-belt attaches to the engine pulley, and the blade pulley. This item links motor and blade to allow the motor drive shaft to rotate the blade. This item is sold as an individual replacement part.

This is a genuine OEM sourced replacement part that is intended to be used with lawnmowers, snowthrowers, and tillers from Bolens, Ryobi, Yard Machines, MTD, Troy-Bilt, and Yard-Man. The sealed bearing is used to limit friction between a rotating shaft and a fixed part assembly. It is recommended to review your models illustrated part dia...Read moregram to confirm the bearing\\\'s compatibility. This item is sold as an individual replacement part.

This is a genuine item that is supplied by the original equipment manufacturer for use with MTD and Ryobi lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to refer to the diagrams of your model for the correct location and application of this item. Keep in mind it is made of durable metal and is sold individually.

This Bell-Wash Flat Washer is an OEM part that measures .40 inches I.D. x 88 inches O.D. This washer is a silver, metal, washer sold individually. This part is rated as Easy to install by customers. If missing or damaged (likely due to fatigue) it should be replaced. Refer to your owners manual to ensure this is the correct part for you.

The metal screw attaches to the block steering. It is a genuine OEM sourced part which is specially designed for use with chippers, shredders, edgers, lawn tractors, and snowblowers made by MTD, Yard Machines, Troy-Bilt, Bolens, and Yard Man. This item is available as an individual replacement. A wrench will be necessary during the instal...Read morelation of this part. It will need to be replaced if it becomes stripped or broken.

This OEM Hex Nut is a gold colored, metal, 3/8 x 16 part, sold individually. It is installed with a wrench, or socket and torque wrench, by torquing to the manufacturer specfications, and is used to secure parts in place. You will know it is broken when you see the nut has damaged threads or rounded off edges, which can happen due to fa...Read moretgiue. If it is damaged, it should be replaced. This part can have different uses and different degrees of difficulty depending on the part the hex nut is securing, but generally the replacement of this part is an easy job.

This is an authentic OEM component from Ryobi. The hex bolt (5/16-18 x .1in. lg., gr.5) compatible with many lawn tractors, helping to secure the steering gear assembly. The metal hex bolt is sold individually, and a wrench is required for the replacement.