22DH Shindaiwa Hedge Trimmer - Overview

The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches and 14.19mm in height. This part is used to pump fuel from the tank to the carburator and is rated Easy to install. This part installs on...Read moreto the primer assembly. If the part dries out or starts leaking that means it is broken (likely due to fatigue or general wear) and must be replaced. Check the model number to ensure you are choosing the right part.

This OEM Nut is a silver, metal, individually sold part. It can be installed using a wrench or socket by torquing to the manufacturer specifications. This part may become damaged over time due to fatigue, which will result in damaged threads or rounded off edges. If damaged it should be replaced. Check your owners manual to see if this...Read more is the correct part for you, as this part can be applicable to a long list of equipment. The difficulty of this part installation varies depending on its application, but it genuinely should be an easy repair.

This OEM Fuel Filter is a white and silver, steel part, sold individually. It requires a pair of pliers to install and is ranked as Easy to repair by our customers. This part attaches inside of the fuel tank, and is used to clean the fuel of debris. This part should be changed regularly as part of good engine maintenance. If the engine ...Read moresounds like it is not getting enough fuel or is underperforming, remove the filter to heck for a blockage. If there is a blockage or the part is leaking, then it likely needs a replacement.

This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install. You will know you need a new one if there is a leak around the hose where this clip is used to secure it, or if the fuel line detaches.

This air purge body assembly is a genuine OEM component. It is specially designed for Echo and Shindaiwa handheld lawn and garden equipment. By pressing on the purge bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in ...Read morethe fuel return line. At some time the primer will lose its elasticity or crack and need to be replaced. It is a complete assembly which includes the plastic body housing and the rubber bulb. To ensure the correct installation of the new part, refer to the diagrams of your specific model. You will need a screwdriver to remove the old assembly and connect the new one.

This is a genuine replacement part manufactured for outdoor power equipment. This plastic starter drum can also be called the starter pulley, because the starter rope is wrapped around the drum, and the starter spring provides tension to recoil the rope. The starter drum is sold individually, and the spring and rope are available separate...Read morely. Additional recommended parts: • Starter rope, part number: 17722610120 • Recoil spring, part number: 17722042030

This genuine Primer Cover, or Primer Pump Cover, is a silver, individually sold, steel part with dimensions of around 1x1 inch. This part is installed using a screwdriver, and is rated as Easy to install by our customers. This part secures the plastic primer bulb to the air purge body assembly, and must be replaced if damaged or bent.

This replacement bolt is used on Shindaiwa hedge trimmers. It is designed to secure the trimmer blade. The square area under the head is made to fit into a square hole of the of the blade. This opening restrains the bolt and keeps it from turning when the blade nut is tightened. This bolt is sold individually.

This replacement fuel pipe is a high-quality OEM sourced component which is specially designed for use with Shindaiwa hedge trimmers. The purpose of this tube is to deliver the fuel from the tank into the carburetor. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess...Read more fuel is then forced back into the tank through the return line which is sold separately. Over time fuel pipes tend to become brittle and may crack eventually requiring replacement, please note this durable plastic item is sold individually.

This is an authentic OEM part from the Shindaiwa manufacturer. The metal washer is compatible with many hedge trimmer devices. The washer helps the bolts to secure the trimmer blades. This item is sold individually. A wrench and a hex key are often needed for the repair.