22911 - Overview

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

This is an authentic replacement part manufactured for use with Toro snowthrowers. The ni lock nut is designed to prevent from being unthreaded from vibration. This nut is used with several different models of snowthrowers and is used with various applications. The nut is sold as an individual replacement part, please see model diagram for associative parts.

This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.

This replacement flat washer is sourced directly from the original equipment manufacturer, it is specially designed for use with Toro riding lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure a tight fit, please refer to the appropriate diagrams of your model for the correct location an...Read mored application of this hardware. Keep in mind this durable metal washer is sold individually.

This is an original Toro replacement part. The decal is commonly found on lawnmowers. This part is made of paper with an adhesive backing, and is placed on the engine block. No tools are required when replacing this item. Simply remove the old decal, peel off the adhesive cover, and carefully stick the new one in place. This item is sold individually.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal hex nut is part of the mower\\\'s deck assembly. This nut is used to secure the blade pulley to the spindle shaft assembly. This part is sold individually.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal hex head screw is used with a variety of different models of snowthrowers. This screw can have different applications depending on the model of snowthrower. The screw is sold as an individual replacement part, please see model diagram for part location and usage.

This individual rubber O-ring is a genuine OEM part for various outdoor equipment models and has an approximately 1-inch inner-diameter. O-rings are typically used to seal various gaps within hydraulic systems to prevent the escape of liquids or gases, and if you notice that the motor of your equipment is leaking or performing poorly, it ...Read moremay be a sign of an aging O-ring, because over time they lose their elasticity and crack. Be sure to check any diagram of your equipment for the exact placement of this O-ring.