22618 - Overview

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this hig...Read moreh-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

The flat washer is an OEM replacement part that provides a wide surface area to distribute the load of a bolt or a screw when it is installed. This protects the part being fastened from getting damaged or deformed and provides a more secure fit for the bolt/screw. This flat washer is made of steel and has a diameter of 0.375 inches and a ...Read morethickness of approximately 0.063 inches. To replace the flat washer, first unthread the bolt/screw before using a flathead screwdriver to carefully pry it off. Clean the area, place the new flat washer in position, and thread the bolt/screw back on. Sold individually.

The lock washer goes next to the flat washer and is made of metal. It is available as an individual replacement part. This genuine item is supplied by the original equipment manufacturer for use with snowblowers made by Toro and Lawn Boy. A wrench might be helpful during the installation of this part. This item may become broken and will need to be replaced.

This is an authentic Toro replacement part. The flat washer is commonly found in a variety of Toro yard machines such as lawn mowers and snow throwers. The flat washer is generally used to provide space and protection between a nut or bolt head and a housing. Please be aware that there are different washers used in the machine. Refer ...Read moreto the parts diagram to be sure of ordering the correct part. You may require a wrench, screwdriver, or pliers to replace this item. This part is sold individually.

This part is available as an individual replacement. The nut-keps attaches to the lower bracket-housing. A wrench might be helpful during the installation of this part. This is made of metal and will require replacing if it breaks. It is a genuine OEM sourced part which is specially designed for use with Toro and Lawn Boy snowthrowers.

This OEM lock nut is used in your lawn equipment to keep its parts securely fastened and prevent them from coming loose. It is often found at the end of a threaded bolt. This lock nut has a nylon insert inside and a diameter of 3/4 inches. Over time, the lock nut can wear out due to regular use. When this happens, you may hear strange kno...Read morecking or rattling noises coming from your machine. You may also feel more vibrations from it than usual. If you take a close look at the nut, it might appear bent or deformed. If you do not replace a worn-out lock nut, the parts of your machine can fall off. To replace a lock nut, you need a socket wrench to loosen it from your machine. Since this lock nut is sold individually, consult your instruction manual to determine how many your machine needs. If you are replacing one lock nut, it is recommended that you replace all of them as they tend to wear out at the same time.

This individual rubber O-ring is a genuine OEM part for various outdoor equipment models and has an approximately 1-inch inner-diameter. O-rings are typically used to seal various gaps within hydraulic systems to prevent the escape of liquids or gases, and if you notice that the motor of your equipment is leaking or performing poorly, it ...Read moremay be a sign of an aging O-ring, because over time they lose their elasticity and crack. Be sure to check any diagram of your equipment for the exact placement of this O-ring.