223210X692A (2003) Briggs and Stratton Lawn Mower - Overview

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

This is a genuine item is supplied by the original equipment manufacturer for use with Murray lawn mowers. It is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. It provides an identical replacement for a missing or a faulty co...Read moremponent that was installed on a new unit. Please make sure to check the owner's manual and the appropriate diagrams for your model for the correct repair procedure. Keep in mind this high-quality rubber insulated engine stop cable is sold individually.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

It is a genuine single blade which is supplied by the original manufacturer for use with Murray lawn mowers. Over time the blade may wear out or get damaged eventually requiring replacement to maintain a clean cut lawn. Dull or worn lawnmower blades can cause the grass blades to tear and fray causing a yellowish coloring to the top of the...Read more lawn. It is a high-quality component which is made of durable metal and is sold individually. Refer to the owner's manual for your model to ensure the correct repair procedure. You will need a wrench to remove and resecure the hardware that holds the blade.

This is a genuine manufacturer-approved part which is specially designed for use with Murray. It is an identical replacement for a missing or damaged 14" wheel that was originally installed on a new unit. This high-quality component is made of durable plastic materials and is sold individually, please note the hardware to secure it is sold separately.

This OEM Washer (j.39-2.2 11G Fl), is a silver, metal part, requiring a wrench or socket set to install. Installation is rated as "Easy". This washer can be used as a spacer between the bottom of the blade and the blade bolt. It attaches on the blade bolt to support the blade. If broken due to fatigue/damage, you may hear a rattling sound...Read more underneath the cutting deck and should replace the part. Refer to your make, model and diagrams to check if this model is right for you.

This is an original replacement part that is manufactured for use with walk-behind lawnmowers. The side chute connects to the mower deck and is used to guide grass clippings out of the deck. This plastic side chute is available as an individual replacement part, please see model diagram for associative parts.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This item has been sourced from the original manufacturer to be used with walk-behind lawnmowers from Murray. The plastic cable fastener attaches to the lower handle. This item is used to secure the cable to the handle shaft to keep the cable secure and out of the way. This item is sold as an individual replacement part.