The function of the grease filter is to trap grease into the filter from the exhaust air. The grease filter is intended to be used with certain downdraft cooktops and ranges. This grease filter is roughly fourteen inches long and almost twelve inches wide, and chrome in color. Removing your old grease filter and replacing it with a new on...Read moree is an easy job, users say it took them less than fifteen minutes to install. We recommend that when removing your current grease filter, you use work gloves to protect your hands and clean the entire area thoroughly before installing the new filter.
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
The surface element control switch is an essential component in electric ranges, responsible for regulating the heat output of the surface burner. It allows you to adjust the temperature levels by controlling the electrical flow to the burner. If your stovetop burner fails to turn on, stays on high heat, or doesn’t respond to adjustments,...Read more a faulty switch could be the cause. This switch features a double flat shaft design and is nut-mounted for secure installation. Always disconnect the power supply before replacing the switch to prevent electrical hazards. Ensure compatibility with your appliance model before purchasing.
This set of four burner knobs helps control the heat on a range or cooktop. Each knob fits a double-flat control shaft and shows the burner settings clearly. Replace the knobs if they are cracked, loose, worn, or missing. Before ordering, inspect each shaft for bending or damage. A new knob will not fix a bad burner switch. Confirm fit wi...Read moreth the full appliance model and shaft shape. Turn every control to Off, disconnect power, pull the old knobs straight off, and press the new ones on without force. Check that each pointer lines up correctly.
This grease jar lid is used for some of Maytag/Jenn-Air's brands of ranges and cooktops. This lid is not quite an inch high and is three inches in diameter.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
replaced filter
486 of 513 peoplefound this instruction helpful.
ELOISE from MILFORD, OH
Really Easy
Less than 15 mins
pulled old one out , cleaned the area & replaced with the new one.
Was this helpful?
Thank you for voting!
Old grease filter that I actually did not know I had to change
451 of 540 peoplefound this instruction helpful.
deborah from fort pierce, FL
Really Easy
Less than 15 mins
Removed the old grease screen and cleaned the entire area thoroughly and replaced the screen
Was this helpful?
Thank you for voting!
My Jenn-Air is an "antique." The filter was disgusting!
168 of 324 peoplefound this instruction helpful.
marion from aspen, CO
Really Easy
Less than 15 mins
I had put up with a filter that got more and more raggedy every year, but I thought my 30 yr. old range/grill top was too old for me to find an replacement filter. What a great service you offer. I found you by web-surfing, typed in the model #, and presto--you sent me the shiny new filter. All I had to do was pop it in and throw away
... Read morethe nasty grill (after washing the scent off to keep the bears out of my Colorado garbage.) Thank you!