22291 Toro Lawn Mower - Overview

This snap ring fits into a groove to hold a pinion gear or other drive part in place. A loose drive part may mean the ring is bent, weak, or missing. Check the groove, washers, bearings, and shaft for damage before replacing it. Confirm fit with the full machine model, serial range, and parts diagram. Turn off the equipment and disconnect...Read more the battery or spark plug lead when needed. Wear eye protection and use retaining-ring pliers. Make sure the new ring sits fully and evenly in the groove before use.

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which is sold individually. It includes a metal washer. Please note you would need a wrench to replace this blade bolt.

A genuine item which is supplied directly from the original equipment manufacturer for use with Toro lawn mowers. It is a special spacer which is secured between the wheel and the wheel cover, please refer to the appropriate diagram of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.

The metal blade driver assembly attaches to the blade with the guide belt wrapped around it. The spacer will go inside the driver. This part is used in lawn mowers. If the lawn mower wheels will not turn you may need to replace the blade driver. A wrench will be needed to replace this part if it becomes damaged. The driver is available as an individual replacement item and is an original Toro part.

This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This screw is available as an individual replacement part.

This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this hig...Read moreh-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

The Nut-Flange, Ni, simply known as a Flange Nut, is a silver metal individually sold part which can be applied with a wrench or socket and torque wrench. Simply torque the part to the manufacturer specifications. It is used to secure the idler arm assembly to the frame, and will need to be replaced if damaged. You can tell if it is brok...Read moreen if there are signs of visible damage, or the part won't tighten all the way due to damaged threads. Customers rated this repair as easy.

This authentic item is supplied directly from the original equipment manufacturer for use with Toro lawn and garden equipment. It is an identical replacement for a missing or a faulty screw that was installed on a new unit. This is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagr...Read moreams of your model for the correct location and application of this component. Keep in mind this high-quality screw is made of durable metal and is sold individually.