My Orders
- Home
- 2208010010M
- Instructions
2208010010M Snapper Snow Blower - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Installed new scrapper blade
3 of 5 people
found this instruction helpful.
-
Larry from ULYSSES, KS
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Unbolt old one with 4 screws and nuts and replaced new blade with new screws . Very easy fix with new blade and screws . Thanks
Was this helpful?
Thank you for voting!
Blower chute kept falling off
2 of 3 people
found this instruction helpful.
-
Michael from FAIRMONT, WV
- Really Easy
- Less than 15 mins
-
Socket set
Ordered the plastic chute retainer parts. 3 required. Remove screws from chute to retainer 6 total. Replace chute and hold retainer clip under chute and replace screws. Do not over tighten only made of plastic. Make sure to spray some wd 40 on rim so it moves smoothly. If it doesnt loosen screws a little. Works perfect.
Was this helpful?
Thank you for voting!