21BA144R966 (2007) Troy-Bilt Cultivator - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

The Fuel Pick Up Line with Filter is an OEM plastic part used to filter and deliver fuel to the carburetor. If broken, the engine will not get fuel and the part should be replaced. This part is rated "Easy" to install and only requires a set of pliers.

The Fuel Return line is a blue plastic tube which attaches to the purge bulb and fuel tank in order to return fuel back to the tank after the primer bulb is pressed. It is rated "Easy" to install and requires pliers and a screwdriver.

This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.

This is a replacement part sourced directly from the manufacturer for Craftsman trimmers and edgers. The fuel cap prevents fuel from spilling out of the fuel tank by covering the opening on the fuel tank. To install the fuel cap requires no tools, simply twits it into place. This part is made of plastic and is sold individually.

This is an authentic OEM replacement part for Ryobi, Troy-Bilt, and Yardman Tiller/Edgers and Cultivators. The purpose of the air filter is to separate any dust and debris before entering the carburetor and engine. Over time the filter will get clogged and dirty eventually requiring replacement to keep your model running at its peak perfo...Read morermance. This foam filter is an individually sold part. A screwdriver is required for this repair.

This is sold as a set that contains all the necessary parts. The drive shaft housing upgrade kit parts are made of durable materials. It might require a screwdriver and a socket set to replace these items. They will require replacing if they become broken. These are genuine MTD and Troy-Bilt replacement parts for use in cultivators and edgers.

This is a genuine manufacturer-sourced component which is specially designed for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty flex shaft that was installed on a new unit. The part helps to drive the unit. Please make sure to refer to the appropriate diagrams of your model for the correct loc...Read moreation and application of this part. Keep in mind this high-quality shaft is made of durable metal and is sold individually.

This is a high quality OEM supplied replacement hardware that is specially produced for use with lawn and garden equipment. It is a standard hardware that has multiple uses depending on the unit, please make sure to check appropriate diagrams for correct location and use of this screw. Please note one durable metal torx screw is included per order.

This genuine OEM supplied part is specially designed for use with a variety of lawn and garden equipment. It is a standard hardware which may have multiple applications. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this part. This is an identical replacement for ...Read morea missing or a damaged flange lock nut that was installed on a new equipment. One durable metal part is included. A wrench will be needed to secure or remove this hardware.

This Click Pin (aka a Lynch Pin) is a metal, gold, individually sold pin which can be installed with a screwdriver and socket set. It attaches to the gearbox assembly and will need to be replaced if missing or broken. Customers have determined that this is an easy repair.

The Recoil Spring is a silver, metal spring which attaches inside the starter assembly. It is used to wind the rope back around the pulley after it has been pulled. If broken, the starter rope will not retract and the part must be replaced. This spring is rated "Medium" difficulty to install and will requires a screwdriver, pliers and a wrench set.