21AE683F766 (2005) Troy-Bilt Tiller - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This OEM Wheel Shaft Oil Seal is a black rubber part which attaches to the drive shaft to prevent leaks between the wheel shaft and transmission case. Installation is rated as "Medium" difficulty and requires a Screwdriver, Hammer, Washer, and Pipe to fit in the seal. If broken due to damage/fatigue, there will be a leak and the part shou...Read moreld be replaced. Refer to your make, model, and diagrams to ensure this is the right part for you.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This forward drive V-belt is used on rear-tine garden tillers to transfer power from the engine to the transmission for forward movement. Built for durability and consistent grip, it helps maintain smooth operation of the drive system. It’s a direct replacement for worn or slipping belts to restore proper tiller performance and traction.

This Oil Seal has an OD of 1-3/4" and ID of 3/4". Installation of this OEM seal requires a screwdriver, pliers, socket set and wrench set, and is rated as being "Medium" difficulty by customers. This rubber seal attaches onto the drive shaft and prevents leaks between the drive shaft and transmission case. If broken due to wear/fatigue th...Read moreere will be a leak, and the part should be replaced. Refer to your make, model and diagram to ensure this part is correct for you.

NOTE: Battery is not charged and does not include electrolyte or acid.

This OEM 5 Pin ignition Switch is a silver, steel, individually sold part. It can be installed using a wrench and screwdriver, and has been rated as Easy to install. The part attaches to the dashboard, and is used to start and shut off the engine. If it is broken (likely due to fatigue), you will no longer be able to start or stop your ...Read moreengine and the part must be replaced. Refer to your owners manual or model number to ensure you are purchasing the correct part.

This pair of keys is supplied by the equipment manufacturer for use in lawn and outdoor power equipment. The key is made of metal and designed to prevent unauthorized use or accidental starting of the equipment. It is fitted into the ignition switch, found near the operator seat or control panel. If the key is lost, damaged, corroded or w...Read moreorn down, you will not be able to engage and start the engine. These keys come in a set of two.

This is a genuine item that is supplied by the original equipment manufacturer for use with MTD and Ryobi lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to refer to the diagrams of your model for the correct location and application of this item. Keep in mind it is made of durable metal and is sold individually.

This authentic OEM item is specially made for MTD and Troy-Bilt tillers. It is one of the special seals for the transmission shaft. Unfortunately, over time the material tends to wear out and it may begin to crack eventually requiring a replacement. Keep in mind this high-quality oil seal is made of durable rubber and is sold individually...Read more. Check the owner's manual and the diagrams for your model to ensure the correct repair procedure. A wrench set will be needed to replace this component.

This authentic item is supplied directly from the original equipment manufacturer for use with MTD and Troy-Bilt lawn and garden equipment. It is an identical replacement for a missing or faulty spring that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and...Read more application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.