21AE663D26665HP (2007) Troy-Bilt Tiller - Overview

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

This is a genuine OEM sourced item that is specially produced for Troy-Bilt and MTD roto-tillers. The purpose of this component is to provide a tight seal which will prevent oil from leaking. It is an identical replacement for a missing or worn seal-oil for the tine shaft that was originally installed on a new unit, please make sure to ch...Read moreeck the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This OEM Forward Idler Pulley attaches to the pivot bracket to allow the forward belt to idle when not in forward motion. If broken, the machine will no longer be able to propel forward, and the part must be replaced. This part is rated as "Easy" to install by customerss, and requires a wrench set. It is individually sold, and constructed...Read more of metal. Refer to your make, model and diagrams to ensure this is the right part.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and MTD lawn and garden equipment. This is a special component that is utilized to provide a tight seal between connected components, please make sure to refer to the appropriate diagrams of your model for the correct location an...Read mored application of this part. Keep in mind it is a high-quality part which is made of durable metal and is sold individually.

This is an authentic Troy-Bilt replacement part that has been sourced from the original manufacturer to be used with tillers. The knob attaches to the end of the depth regulator bar and is used to provide a grip to the bar when changing the depth of cut. This item is available as an individual replacement part.

Built for a right-hand position, this 12-inch bolo tine curves to cut and lift soil as the tiller moves. The black coating helps protect the metal during storage and normal use. This is one outer tine, not a complete set. Check the machine diagram for its exact place because ?right-hand? can refer to the tine layout, not simply the side y...Read moreou see. Stop the engine, close the fuel valve, and disconnect the spark plug. Wear sturdy gloves, mount the tine with its curve facing the shown direction, and secure it with sound hardware.

This 12-inch left-hand bolo tine cuts and turns soil as the tiller shaft rotates. Replace it if the blade is bent, cracked, badly worn, or no longer tills at the same depth as the other tines. Left- and right-hand tines curve in different directions, so use the complete model diagram to identify the correct position. Stop the engine, let ...Read moreit cool, close the fuel valve, and disconnect the spark plug lead. Support the tiller securely, wear heavy gloves, and inspect the mounting bolts and tine holder before fitting the replacement.

This OEM Top Locknut measures 5/16x18, is made of metal, and it isused to secure parts in place and prevent backing out from vibration. Replacing this part varies in difficulty depending on the part it is securing and the equipment in question, but it is generally an easy job according to our customers. Installation requires a wrench or socket.

This is a genuine OEM sourced hardware that is specially made for MTD and Troy-Bilt tillers. It is utilized to provide a tight seal on the eccentric shaft, unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality seal is made of durabl...Read moree rubber material and is sold individually. Please make sure to check the diagrams of your model for the exact location of this component.

This is a genuine manufacturer-sourced part which is designed for use with MTD and Troy-Bilt lawn and garden equipment. The clutch cable engages the deck. It is an identical replacement for a faulty or missing cable that was installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location ...Read moreand application of this part. Keep in mind this high-quality clutch cable is sold individually.